Sprocket 06B-2 z=32 with hub, hardened

Product Description

Sprocket 06B-2 z=32, hardened hub

Sprocket 06B-2, duplex, with 32 teeth and a hardened hub - pitch 3/8" (9.525 mm). As a European manufacturer, Ozdowski supplies the sprocket in C45E steel (EN 10083-1), in accordance with DIN 8187 / ISO 606 - the teeth are induction hardened (45-55 HRC), while the hub remains soft and easy to machine.

Technical data

Frequently asked questions

How do you calculate the pitch circle diameter of a sprocket?

The pitch circle diameter (Dp) is, in simplified terms, the line along which the chain rollers roll. It is calculated using the formula: pitch divided by sine (180° / number of teeth).

How does material quality prevent the teeth from "shearing" during sudden machine jerks?

Soft, uncertified sheet metal deforms under a sudden jerk - the teeth bend over. Steel from a certified melt, correctly heat-treated, has a high yield strength and withstands a torque surge without permanent deformation.

When is it worth considering a sprocket made of reinforced steel for heavy-duty operating conditions?

In heavy dust, with powerful jolts (e.g. in presses) and where a breakdown in the middle of the season cannot be afforded, sprockets made of higher-strength quenched and tempered steel are often a good solution - it is worth consulting the supplier about unusual operating conditions.

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Where is this product used?

Typical applications of the 06B-2 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.