Sprocket 06B-1 z=114 for Taper-Lock bush 1215

Product Description

Sprocket 06B-1 z=114 for Taper-Lock bush 1215 is designed for 06B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 9.525 mm (3/8"). It has 114 teeth and is made of C45 steel.

The sprocket has a seat for a Taper-Lock 1215 clamping bush, so it can be mounted on the shaft without boring the hole or cutting a keyway in the sprocket - simply choose a 1215 bush with a bore that matches the shaft. The hub diameter is 80 mm and the total width of the sprocket is 38 mm. The bush is not included - the 1215 bush can be purchased separately from our range.

Technical data

Applications

It is used in industrial automation drives, feeders and food industry machinery.

Frequently asked questions

Which chain does this sprocket fit?

06B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 9.525 mm. A simplex sprocket requires a single-strand (simplex) chain.

Does it fit ASA 35 chain?

No. ASA 35 chain (American standard) has the same pitch, but a different roller diameter (5.08 mm instead of 6.35 mm) and a different inner width (4.77 mm instead of 5.72 mm). The 06B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How should sprockets be aligned during installation?

The driving and driven sprockets must lie in one plane. Alignment can be checked with a long steel straightedge placed against the sides of both wheels or with a laser alignment tool. Even a small misalignment wears the sides of the teeth and speeds up chain wear.

When does a sprocket need replacing?

When the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced. Thanks to the Taper-Lock bush, replacement is quick.

Can a new chain be fitted on a worn sprocket?

This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.