Sprocket 06A-2 (35-2) z=20 with hub
- Recommended Product
- Vendor's Recommendation
Available product promotions:
-
Weight0,46kg
-
UPC Code5908453531926
Product Description
Sprocket 06A-2 (35-2) z=20 with hub works with ASA 35 (06A-2 / 06C-2) roller chain, double-strand (duplex), with a pitch of 9.525 mm (3/8"). It has 20 teeth and is made of C45 steel in accordance with ISO 606 and ANSI B29.1.
The sprocket has a one-sided hub with a diameter of 49 mm and a pilot bore of Ø12 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 30 mm.
Technical data
| Chain | ASA 35-2 / 06A-2 / 06C-2 |
| Pitch | 9.525 mm (3/8") |
| Chain inner width | 4.77 mm |
| Roller diameter | 5.08 mm |
| Number of teeth | 20 |
| Pitch diameter Dp | 60.89 mm |
| Outside diameter De | 65.77 mm |
| Type | sprocket with hub |
| Hub diameter d | 49 mm |
| Pilot bore D | 12 mm |
| Total width H | 30 mm |
| Tooth width | 14.4 mm |
| Material | C45 steel |
| Weight | 0.46 kg |
| EAN | 5908453531926 |
Applications
It is found in textile machinery, gate and roller shutter drives and workshop equipment. The double-strand version carries higher loads than a single-strand one of the same pitch, so it is chosen where there is no room for a chain with a larger pitch.
Frequently asked questions
Which chain does this sprocket fit?
ASA 35-2 (06A-2) roller chain with a pitch of 9.525 mm. The same chain is also designated 06C-2. A duplex sprocket requires a double-strand (duplex) chain.
Does it fit 06B chain?
No. 06B chain (European standard) has the same pitch, but a different roller diameter (6.35 mm instead of 5.08 mm) and a different inner width (5.72 mm instead of 4.77 mm). The ASA 35 sprocket is designed for American-standard chain, so the two systems should not be mixed.
Is this sprocket available in another version?
Yes. Also available: Sprocket 06A-1 (35-1) z=20 with hub.
How should a sprocket be protected before a longer machine standstill?
After cleaning with a brush and technical cleaner, coat the whole surface of the sprocket with preservative grease or thick spray oil that displaces moisture. This protects the C45 steel against corrosion during downtime, for example out of season.
How does tooth wear affect machine operation?
Worn teeth make the chain engage the sprocket unevenly and abruptly. This causes vibrations that are passed on to shafts and bearings and accelerate wear of the whole drive.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight0,46kg
-
UPC Code5908453531926