Sprocket 06A-1 (35-1) z=30 with hub

Product Description

Sprocket 06A-1 (35-1) z=30 with hub works with ASA 35 (06A-1 / 06C-1) roller chain, single-strand (simplex), with a pitch of 9.525 mm (3/8"). It has 30 teeth and is made of C45 steel in accordance with ISO 606 and ANSI B29.1.

The sprocket has a one-sided hub with a diameter of 60 mm and a pilot bore of Ø12 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 28 mm.

Technical data

Applications

It is used in industrial automation drives, dosing equipment and printing machines.

Frequently asked questions

Which chain does this sprocket fit?

ASA 35-1 (06A-1) roller chain with a pitch of 9.525 mm. The same chain is also designated 06C-1. A simplex sprocket requires a single-strand (simplex) chain.

Does it fit 06B chain?

No. 06B chain (European standard) has the same pitch, but a different roller diameter (6.35 mm instead of 5.08 mm) and a different inner width (5.72 mm instead of 4.77 mm). The ASA 35 sprocket is designed for American-standard chain, so the two systems should not be mixed.

What is the set screw hole in the hub for?

The threaded hole, usually made above the keyway or at 90° to it, takes a headless set screw. It prevents the sprocket from sliding along the shaft when the machine vibrates.

Can a sprocket with hub be welded to the shaft?

Technically it is possible, but we do not recommend it. Welding overheats the material, can bend the shaft and damage nearby bearings, and makes later replacement of a worn sprocket very difficult. It is better to fix the sprocket with a key.

How should sprockets be aligned during installation?

The driving and driven sprockets must lie in one plane. Alignment can be checked with a long steel straightedge placed against the sides of both wheels or with a laser alignment tool. Even a small misalignment wears the sides of the teeth and speeds up chain wear.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.