Log in

Price Inquiry

New Cart 0 €

Your cart is empty

Sprocket 03-1 z=43 plate wheel, C45 steel

Availability:
Shipping from €

Available product promotions:

Added To Cart

  • Weight
    0,085kg
  • UPC Code
    5907009361727
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm
  • Product Description
  • Product Features
  • Add to the product comparison toolCompare
Added to the product comparison tool
You may add 2 to 4 products
You may add 4 products maximum
Go to Comparison Tool

Product Description

Sprocket 03-1 z=43 plate wheel, C45 steel is designed for 03-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 5 mm. It has 43 teeth and is made of C45 steel.

The plate wheel has a pilot bore of Ø8 mm. It can be bolted or welded to your own hub, flange or drum, which makes it a good choice for larger ratios and non-standard designs.

Technical data

Chain03-1 (DIN 8187 / ISO 606)
Pitch5 mm
Chain inner width2.5 mm
Roller diameter3.2 mm
Number of teeth43
Pitch diameter Dp68.49 mm
Outside diameter De70.6 mm
Typeplate wheel (no hub)
Pilot bore D8 mm
Tooth width2.3 mm
MaterialC45 steel
Weight0.085 kg
EAN5907009361727

Applications

It is used in industrial automation drives, dosing equipment and printing machines. Plate wheels are often mounted on drums and flanges and in large reduction gears.

Frequently asked questions

Which chain does the 03-1 z=43 sprocket fit?

03-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 5 mm. A simplex sprocket requires a single-strand (simplex) chain.

How should sprockets be aligned during installation?

The driving and driven sprockets must lie in one plane. Alignment can be checked with a long steel straightedge placed against the sides of both wheels or with a laser alignment tool. Even a small misalignment wears the sides of the teeth and speeds up chain wear.

When does a sprocket need replacing?

It should be replaced when the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced.

Can a new chain be fitted on a worn sprocket?

This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.

What causes wear on the sides of the teeth?

Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.

Product Features

  • Weight
    0,085kg
  • UPC Code
    5907009361727
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm

Responsible Entity

Manufacturer

Ozdowski Sp. z o.o.

Zajęcza 4H

57-300 Kłodzko, Poland

Responsible Person

Paweł Ozdowski

Zajęcza 4H

57-300 Kłodzko, Poland