V-belt pulley SPB 85/2, 2 grooves, cast iron, pilot bore
Available product promotions:
-
Weight1,6kg
-
UPC Code5907009349640
Product Description
V-belt pulley SPB 85/2, 2 grooves, cast iron, pilot bore is a V-belt pulley with SPB grooves made to ISO 4183 and DIN 2211, with a datum diameter of 85 mm. Number of grooves: 2. It is made of EN-GJL-200 grey cast iron, phosphated and statically balanced for a peripheral speed of up to 35 m/s.
The pulley has a hub with a pilot bore Ø10 mm, which is bored out to the shaft size and completed with a keyway. The face width is 44 mm with a groove pitch of 19 mm.
Technical data
| Groove profile | SPB (ISO 4183, DIN 2211) |
| V-belt | SPB 16.3 × 13 mm (narrow section), also classical B/17 |
| Datum diameter dp | 85 mm |
| Outside diameter De | 92 mm |
| Number of grooves | 2 |
| Groove pitch e | 19 mm |
| Face width F | 44 mm |
| Mounting | pilot bore for reboring |
| Pilot bore | Ø10 mm |
| Material | EN-GJL-200 cast iron, phosphated |
| Max. peripheral speed | 35 m/s |
| Weight | 1.6 kg |
| EAN | 5907009349640 |
Applications
Drives of food, paper and textile industry machines, mixers and centrifuges.
Frequently asked questions
Which V-belt pulley has the SPB profile, a datum diameter of 85 mm and 2 grooves?
This is the v-belt pulley SPB 85/2, 2 grooves, cast iron, pilot bore. The outside diameter is 92 mm and the face width 44 mm.
Which V-belt fits this pulley?
A narrow SPB V-belt (16.3 × 13 mm) to ISO 4184 / DIN 7753. Classical B belts (17 mm) to DIN 2215 also run in SPB grooves, but transmit less power. The number of belts equals the number of grooves (2).
How do I prepare the bore for the shaft?
The pilot bore Ø10 mm is bored out on a lathe to the shaft size (usually to tolerance H7) and a keyway is cut to DIN 6885. The pulley is secured axially with a set screw or a retaining ring. After machining the hub must keep a sufficient wall thickness.
How do I calculate the belt speed on this pulley?
Belt speed v = π × dp × n / 60 000, where dp is the datum diameter in mm and n is the speed in rpm. On this pulley at 1450 rpm the belt runs at approx. 6.5 m/s. The pulley is statically balanced up to 35 m/s.
How do I calculate the ratio of a drive with this pulley?
The ratio is the datum diameter of the driven pulley divided by that of the driving pulley, e.g. 85 / 170 = 0.5. Because of the slight slip of the V-belt, the actual speed is approx. 1-2% lower.
What does the lead time depend on?
When ordering, please check the current stock level of this pulley - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may differ between warehouses.
Product photos are for illustration purposes only.
Product Features
-
Weight1,6kg
-
UPC Code5907009349640