Timing pulley L075 z=72 for 3/4" (19.1 mm) belt, for Taper-Lock 1610, cast iron

Product Description

Timing pulley L075 z=72 for 3/4" (19.1 mm) belt, for Taper-Lock 1610, cast iron works with timing belts of the imperial L profile - pitch 3/8" (9.525 mm), belt width up to 3/4" (19.1 mm). The pulley has 72 teeth. It is made of EN-GJL-200 grey cast iron.

The pitch diameter is 218.3 mm and the outside diameter 217.53 mm. The pulley has a seat for a Taper-Lock 1610 clamping bush (bush sold separately) - the bush bore is chosen to suit the shaft, up to 42 mm, without boring the pulley.

Technical data

Applications

Machine tool drives, woodworking machines, belt and roller conveyors, industrial automation equipment.

Frequently asked questions

Which timing pulley has the L075 profile, 72 teeth and a pitch diameter of 218.3 mm?

This is the timing pulley L075 z=72 for 3/4" (19.1 mm) belt, for Taper-Lock 1610, cast iron. The outside diameter (over the tooth tips) is 217.53 mm. The pitch diameter is calculated as Dp = pitch × z / π = 9.525 × 72 / π.

Which timing belt fits this pulley?

A belt with the imperial L profile (pitch 3/8" = 9.525 mm) and a width of up to 3/4" (19.1 mm) - in the belt designation the width 3/4" is written as 075 (e.g. belt 300L075, where 300 is the belt length in tenths of an inch). A narrower belt of the same profile will also run correctly.

Does this pulley work with a metric T10 or HTD belt?

No. The L profile has an imperial pitch of 9.525 mm and a trapezoidal tooth shape, so it does not mesh correctly with metric belts (T, AT) or with HTD belts with rounded teeth. The pulley and the belt must have the same profile.

Which Taper-Lock bush do I need for this pulley?

A Taper-Lock 1610 bush. The bush is bought separately and its bore is chosen to match the shaft diameter - up to 42 mm for this pulley. The bush clamps onto the shaft when the screws are tightened, so the pulley does not need to be bored and removal is easy.

How do I calculate the ratio of a drive with this pulley?

The ratio is the number of teeth of the driven pulley divided by the number of teeth of the driving pulley, e.g. 72 / 18 = 4. A timing belt drive has no slip, so the ratio is constant.

How does a cast iron pulley differ from a steel one?

EN-GJL-200 grey cast iron damps vibration well and is used mainly for larger pulleys. C45 steel pulleys are chosen for smaller diameters and where shock loads occur.

What does the lead time depend on?

When ordering, please check the current stock level of this pulley - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may differ between warehouses.

Product photos are for illustration purposes only.