Timing belt pulley H 300 z=36 for Taper-Lock bush 2517 steel

Product Description

Timing belt pulley H 300 z=36 for Taper-Lock bush 2517 steel - for H belts with a pitch of 1/2" (12.7 mm). Made of C45 steel.

The Taper-Lock system eliminates the need to bore out the hub. The bush slides into the tapered seat of the pulley and, after the screws are tightened to a torque of approx. 50 Nm, it clamps onto the shaft without a press or special tools. Removal is just as simple - one screw inserted into the removal hole pushes the bush out without risk of damaging the shaft.

Used in machines requiring accurate motion transmission: heavy industrial drives, agricultural machinery, machine tools, presses.

When ordering, please check the lead time - it is shown directly next to the product's stock level.

Timing belt pulley H z=36 - Taper-Lock 2517, pitch 1/2" (12.7 mm)

FAQ

Do you ship pulleys from stock?

The stock level is shown above the price and may vary depending on the warehouse.

What materials do you use for pulleys?

C45 steel provides high mechanical strength and fatigue resistance - the right choice for heavily loaded drives with frequent torque peaks.

Does shaft runout damage pulleys?

Yes - shaft runout causes cyclic jerking of the belt, which leads to cracking of the pulley hub and accelerated belt wear. Before mounting the pulley, it is worth checking the shaft runout with a dial indicator.

How do I mount the pulley on a Taper-Lock bush?

The bush is inserted into the tapered seat of the pulley, placed on the shaft and the screws are tightened to a torque of approx. 50 Nm. The pulley is ready in a few minutes, without a press or special tools.