Timing belt pulley 8M 85 z=192 for Taper-Lock bush 3525 Cast iron

Product Description

Timing belt pulley 8M 85 z=192 for Taper-Lock bush 3525 Cast iron - for HTD 8M belts with a pitch of 8 mm (HTD). Made of grey cast iron with a pearlitic structure.

The Taper-Lock system eliminates the need to bore out the hub. The bush slides into the tapered seat of the pulley and, after the screws are tightened to a torque of approx. 80 Nm, it clamps onto the shaft without a press or special tools. Removal is just as simple - one screw inserted into the removal hole pushes the bush out without risk of damaging the shaft.

Designed for synchronous drives in: industrial drives, heavy machinery, production lines.

When ordering, please check the lead time - it is shown directly next to the product's stock level.

Cast iron timing pulley 8M 85 mm, z=192

FAQ

How does excessive belt tension affect the bearings?

Excessive radial force puts high loads on the bearings, leading to overheating and premature failure. The correct tension is specified by the belt manufacturer.

Do you ship pulleys from stock?

The stock level is shown above the price and may vary depending on the warehouse.

What materials do you use for pulleys?

Cast iron dampens vibrations excellently, is resistant to abrasion and dissipates the heat generated by belt friction very well - ideal where quiet and stable drive operation matters.

Does shaft runout damage pulleys?

Yes - shaft runout causes cyclic jerking of the belt, which leads to cracking of the pulley hub and accelerated belt wear. Before mounting the pulley, it is worth checking the shaft runout with a dial indicator.