Timing belt pulley 14M 40 z=90 for Taper-Lock bush 3020 Cast iron

Product Description

Timing belt pulley 14M 40 z=90 for Taper-Lock bush 3020 Cast iron - for HTD 14M belts with a pitch of 14 mm (HTD). Made of grey cast iron with a pearlitic structure.

The Taper-Lock system eliminates the need to bore out the hub. The bush slides into the tapered seat of the pulley and, after the screws are tightened to a torque of approx. 80 Nm, it clamps onto the shaft without a press or special tools. Removal is just as simple - one screw inserted into the removal hole pushes the bush out without risk of damaging the shaft.

Designed for synchronous drives in: heavy industrial drives, presses, agricultural and construction machinery.

When ordering, please check the lead time - it is shown directly next to the product's stock level.

Cast iron timing pulley 14M 40 mm, z=90

FAQ

How does excessive belt tension affect the bearings?

Excessive radial force puts high loads on the bearings, leading to overheating and premature failure. The correct tension is specified by the belt manufacturer.

Do you ship pulleys from stock?

The stock level is shown above the price and may vary depending on the warehouse.

What materials do you use for pulleys?

Cast iron dampens vibrations excellently, is resistant to abrasion and dissipates the heat generated by belt friction very well - ideal where quiet and stable drive operation matters.

Does shaft runout damage pulleys?

Yes - shaft runout causes cyclic jerking of the belt, which leads to cracking of the pulley hub and accelerated belt wear. Before mounting the pulley, it is worth checking the shaft runout with a dial indicator.