Spur gear module 2 z=52 with hub

Product Description

Spur gear module 2, z=52, with hub

The spur gear module 2 shown, 52 teeth, with hub, is a basic component of module drives - it meshes with any other gear or gear rack (toothed rack) of the same module and pressure angle 20°. Made of C45E steel (UNI/EN 10083-1), which ensures high mechanical strength and wear resistance during prolonged operation under load.

Technical data

Frequently asked questions

How does the build quality of a Polish/European manufacturer reduce rolling resistance in the gearbox?

Cheap gears from unverified sources often have a rough tooth surface that acts like sandpaper, raising the temperature and the drive resistance. Our gears have a smooth working surface, which helps maintain the lubricating film and minimises energy losses.

What lubrication is optimal for open module (rack) gear drives?

For open systems (gear + gear rack), it is best to use thick greases with added graphite or copper, which adhere firmly to the teeth and are not flung off by centrifugal force. In very dusty applications, dry Teflon lubricants perform better.

Why is the pilot bore in a module gear often smaller than required?

A "rough" bore allows you to bore it out yourself to the exact, non-standard size of the customer's shaft - a ready-made large bore from stock would rarely match the required size perfectly.

What is backlash and why does it matter?

It is a small gap between mating teeth, necessary for lubrication and thermal tolerance; too little backlash leads to seizing and overheating, while too much leads to jerking and faster tooth wear.

Where is this product used?

Typical applications include conveyor drives, packaging machines, industrial automation and positioning systems using a gear and gear rack pair.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.