Spur gear module 2.5 z=27 with hub

Product Description

Spur gear module 2.5, z=27, with hub

Gear module 2.5, z=27, with hub - a robust component for building and repairing gear transmissions, reducers and rack drives (gear rack + gear). The standard material is C45E steel (UNI EN 10083-1), widely used in the construction of gear transmissions, gear racks and module drives.

Technical data

Frequently asked questions

Are module gears from different manufacturers with the same module interchangeable?

The meshing geometry (module, pressure angle) is standardised, so such gears will mesh with each other, but bore or hub dimensions may differ between manufacturers - when replacing, it is worth checking this before installation.

Do straight-tooth module gears have a specific mounting direction?

No, a straight-tooth gear is symmetrical and can be mounted either way round; direction only matters with helical teeth, where the helix angle must match the mating gear.

Can gears with different modules be combined in one gearbox?

Absolutely not. Teeth of different modules differ in size and pitch. Any attempt to mesh them will end in the drive jamming or the teeth breaking off immediately on the first revolution of the shaft.

What is the module of a gear and how do you measure it correctly?

The module (m) is the basic parameter defining tooth size, i.e. the ratio of the pitch diameter to the number of teeth. The simplest way to measure it in workshop conditions is to measure the outside diameter of the gear (Dz), count the teeth (Z) and use the formula: m = Dz / (Z + 2).

Where is this product used?

Used in industrial machine drives, gate and industrial door automation and as a spare part for existing module gear drives - you only need to keep the same module and pressure angle.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.