Spur gear module 1 z=56 with hub
Available product promotions:
-
Weight0,36kg
-
UPC Code5907009304717
Product Description
Spur gear module 1, z=56, with hub
The module 1 spur gear z=56 with hub is a precision gear transmission component designed to transmit high torques at a constant ratio. Made of C45E steel (UNI/EN 10083-1), which ensures high mechanical strength and wear resistance during prolonged operation under load.
Technical data
| Module (m) | 1 |
| Pressure angle | 20° |
| Number of teeth (z) | 56 |
| Type | Gear with hub |
| Outside diameter (De) | 58 mm |
| Pitch diameter (Dp) | 56 mm |
| Hub outer diameter (d) | 40 mm |
| Pilot bore diameter (D) | 12 mm |
| Tooth width (h) | 15 mm |
| Overall hub height (A) | 25 mm |
| Weight | 0.36 kg |
| Material | C45E steel (UNI EN 10083-1) |
Frequently asked questions
What lubrication is optimal for open module (rack) gear drives?
For open systems (gear + gear rack), it is best to use thick greases with added graphite or copper, which adhere firmly to the teeth and are not flung off by centrifugal force. In very dusty applications, dry Teflon lubricants perform better.
Are module gears from different manufacturers with the same module interchangeable?
The meshing geometry (module, pressure angle) is standardised, so such gears will mesh with each other, but bore or hub dimensions may differ between manufacturers - when replacing, it is worth checking this before installation.
How does the build quality of a Polish/European manufacturer reduce rolling resistance in the gearbox?
Cheap gears from unverified sources often have a rough tooth surface that acts like sandpaper, raising the temperature and the drive resistance. Our gears have a smooth working surface, which helps maintain the lubricating film and minimises energy losses.
Can gears with different modules be combined in one gearbox?
Absolutely not. Teeth of different modules differ in size and pitch. Any attempt to mesh them will end in the drive jamming or the teeth breaking off immediately on the first revolution of the shaft.
Where is this product used?
Module gears of this type are used in speed reducers, machine gearboxes, CNC machine tools and in rack drives of sliding and entrance gates.
When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.
Product photos are for illustrative purposes only.
Product Features
-
Weight0,36kg
-
UPC Code5907009304717