Spur gear module 1.5 z=57 with hub

Product Description

Spur gear module 1.5, z=57, with hub

Gear module 1.5, z=57, with hub - a robust component for building and repairing gear transmissions, reducers and rack drives (gear rack + gear). The standard material is C45E steel (UNI EN 10083-1), widely used in the construction of gear transmissions, gear racks and module drives.

Technical data

Frequently asked questions

How should gears be stored correctly before installation?

Preferably in a dry room, protected against moisture and dust, with a light layer of preservative oil on the teeth and bore - especially important for C45E carbon steel, which can start to corrode without protection.

Does a higher number of teeth (z) with the same module mean a stronger gear?

Not directly - tooth strength depends mainly on the module and face width, not on the number of teeth; a larger z with the same module simply gives a larger gear diameter and a higher ratio relative to the mating gear.

How do you choose a gear rack to match a specific module gear?

The principle is the same as when selecting two gears - the rack must have the same module as the drive gear. Remember to choose the right rack width, which should be equal to or slightly wider than the face width of the gear, in order to transmit the full torque.

Do straight-tooth module gears have a specific mounting direction?

No, a straight-tooth gear is symmetrical and can be mounted either way round; direction only matters with helical teeth, where the helix angle must match the mating gear.

Where is this product used?

It performs well in power transmission systems in machine tools, production lines and sliding gates, where it works together with a gear rack of the same module.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.