Sprocket 24B-3 z=16 with hub

Product Description

Sprocket 24B-3 z=16, with hub

Sprocket 24B-3 with hub, 16 teeth, triplex (three-strand) - a product matched to chain with a pitch of 38.1 mm (1 1/2"). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

How does the choice of the number of teeth affect vibration levels and drive operation?

A smaller number of teeth means fewer meshing points per revolution and larger fluctuations in the instantaneous chain speed (the so-called polygon effect), which results in higher vibration levels. Increasing the number of teeth of the sprocket (at the same pitch) smooths the operation of the drive, although it increases its overall dimensions.

Does a sprocket with hub have a fixed mounting side, or can it be reversed?

The sprocket is usually symmetrical with respect to the plane of the rim, so the rim itself cannot be "reversed incorrectly" - but the hub is usually on only one side of the sprocket, which determines which way the sprocket must be mounted relative to other components on the shaft (e.g. bearings, other sprockets).

Can a sprocket be welded directly to the drive shaft?

Technically this is possible, but we strongly advise against such a solution. Welding overheats the material, damages nearby bearings, bends the shaft and prevents the worn sprocket from being easily replaced later. Always use mounting with a key or a clamping bush.

How do you select a sprocket when the machine lacks space for a larger pitch?

In such a situation, a better solution than increasing the pitch is often to use a multi-strand chain and sprocket of the same (smaller) pitch - several strands together carry a greater load without increasing the sprocket diameter.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.