Sprocket 24B-1 z=11 with hub

Product Description

Sprocket 24B-1 z=11, with hub

Sprocket 24B-1, simplex, with 11 teeth and a hub - pitch 1 1/2" (38.1 mm). As a European manufacturer, Ozdowski supplies the sprocket in C45E steel (EN 10083-1), in accordance with DIN 8187 / ISO 606 - a version without tooth hardening, cheaper than the hardened variant and sufficient for many typical industrial applications.

Technical data

Frequently asked questions

Can a sprocket be reconditioned, e.g. by hardfacing worn teeth?

Technically, hardfacing and re-milling the teeth is possible, but in practice it is rarely cost-effective - the cost of reconditioning is often close to the price of a new sprocket, and restoring the full precision of the tooth profile requires specialist machining. In most cases, replacing it with a new sprocket is the quicker and safer solution.

Does the difference in hardness between sprocket and chain affect their rate of wear?

Yes - chain and sprocket manufacturers select hardness so that they wear as evenly as possible, rather than one element "cutting down" the other. An excessively hard sprocket working with a soft, non-certified chain (or vice versa) leads to faster wear of the weaker element.

How can you recognise an idler sprocket bearing that is starting to wear before it fails?

The first symptom is usually increased noise and noticeable, excessive play of the sprocket when it is moved by hand with the machine stopped. It is also worth periodically checking the temperature of the bearing housing during operation - an increase compared with other bearings in the system signals progressive wear.

When ordering several sprockets for one drive, do they have identical production parameters?

Sprockets of the same catalogue item are produced according to the same documentation and tolerances, so their parameters (pitch, number of teeth, dimensions) match each other regardless of when they were ordered. Any slight differences in the shade of the steel between production batches have no effect on how the sprocket works with the chain.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.