Sprocket 20B-2 (1 1/4") z=46 with hub, steel
Available product promotions:
-
Weight75kg
-
UPC Code5907009384931
Product Description
Sprocket 20B-2 (1 1/4") z=46 with hub, steel is designed for 20B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 31.75 mm (1 1/4"). It has 46 teeth and is made of structural steel.
The sprocket has a one-sided hub with a diameter of 160 mm, welded to the plate, and a pilot bore of Ø30 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 101 mm.
Technical data
| Chain | 20B-2 (DIN 8187 / ISO 606) |
| Pitch | 31.75 mm (1 1/4") |
| Chain inner width | 19.56 mm |
| Roller diameter | 19.05 mm |
| Number of teeth | 46 |
| Pitch diameter Dp | 465.26 mm |
| Outside diameter De | 480.4 mm |
| Type | sprocket with hub |
| Hub diameter d | 160 mm |
| Pilot bore D | 30 mm |
| Total width H | 101 mm |
| Hub | welded |
| Tooth width | 54.6 mm |
| Material | structural steel |
| Weight | 75 kg |
| EAN | 5907009384931 |
Applications
It is found in transmissions of industrial machinery that transfer high torque. The double-strand version carries higher loads than a single-strand one of the same pitch.
Frequently asked questions
Which chain does the 20B-2 z=46 sprocket fit?
20B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 31.75 mm. A duplex sprocket requires a double-strand (duplex) chain.
Does it fit ASA 100 chain?
No. ASA 100 chain (American standard) has the same pitch and roller diameter, but a different inner width (19.05 mm instead of 19.56 mm). The 20B sprocket is designed for European-standard chain, so the two systems should not be mixed.
Can a new chain be fitted on a worn sprocket?
This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.
What causes wear on the sides of the teeth?
Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.
How do I check sprocket run-out after installation?
A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight75kg
-
UPC Code5907009384931