Sprocket 16B-3 z=114 with hub, Cast iron

Product Description

Sprocket 16B-3 z=114, with cast iron hub

Sprocket 16B-3 (pitch 1" - 25.4 mm), triplex (three-strand), 114 teeth, with hub. The sprocket is made of grey cast iron - a traditional material for sprockets in applications with moderate loads and lower rotational speeds; the bore in the hub is a pilot bore intended to be machined to the shaft size.

Technical data

Frequently asked questions

How do I select a sprocket with bearing for a tensioning system?

An idler sprocket (with built-in bearing) is selected according to the pitch of the working chain and mounted on the slack side (not on the tight side). It is important that the bearing is protected against dust, especially in agricultural machinery.

Do you offer sprockets made to custom dimensions, outside the catalogue?

Yes, in addition to catalogue items we also manufacture sprockets to individual drawings or customer requirements - please contact the sales department and provide the required parameters (pitch, number of teeth, hub dimensions, material).

What causes premature wear of the side faces of the teeth?

This is most often the result of misalignment of the sprockets on the shafts (so-called lateral runout of the drive). The chain does not run straight, and its inner plates catch on the sides of the teeth, wearing them down to bare metal. The system must be realigned immediately.

Do I need to select dedicated bearings for a sprocket with hub?

A sprocket with hub mounted with a key does not require its own bearings - the load is carried by the bearings of the shaft on which the sprocket is mounted. A dedicated bearing built into the sprocket is only needed for tensioning or guide sprockets mounted on an axle without its own drive.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.