Sprocket 16B-1 z=95 with hub

Product Description

Sprocket 16B-1 z=95, with hub

Simplex sprocket 16B-1 with hub, 95 teeth - designed for chain with a pitch of 1" (25.4 mm). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

Can a sprocket be reconditioned, e.g. by hardfacing worn teeth?

Technically, hardfacing and re-milling the teeth is possible, but in practice it is rarely cost-effective - the cost of reconditioning is often close to the price of a new sprocket, and restoring the full precision of the tooth profile requires specialist machining. In most cases, replacing it with a new sprocket is the quicker and safer solution.

How often should chain tension be checked on a machine in operation?

In machines operating continuously, it is advisable to check the tension every few weeks, and in a newly installed drive - as early as after the first hours of operation, when the chain "beds in". A correctly tensioned chain has a slight, visible sag on the slack side - too tight a chain accelerates bearing wear, while too loose a chain increases the risk of it jumping off the sprocket.

When ordering several sprockets for one drive, do they have identical production parameters?

Sprockets of the same catalogue item are produced according to the same documentation and tolerances, so their parameters (pitch, number of teeth, dimensions) match each other regardless of when they were ordered. Any slight differences in the shade of the steel between production batches have no effect on how the sprocket works with the chain.

How does a sprocket with hardened teeth differ from the standard version (non-hardened)?

The hardened version has teeth induction-hardened to 45-55 HRC, which extends service life in drives operating continuously and under heavy load. The standard version (non-hardened) is cheaper and fully adequate for applications with moderate load or intermittent operation - our catalogue offers both variants for most pitches and numbers of teeth.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.