Sprocket 16B-1 (1") z=45 with hub, cast iron

Product Description

Sprocket 16B-1 (1") z=45 with hub, cast iron is designed for 16B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 25.4 mm (1"). It has 45 teeth and is made of EN-GJL-250 cast iron.

The sprocket has a one-sided hub with a diameter of 125 mm and a pilot bore of Ø29 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 70 mm.

Technical data

Applications

It works well in high-power agricultural machinery, presses and feeder drives in processing plants. The cast iron design works well for large sprockets in reduction gears, where rigidity and vibration damping matter.

Frequently asked questions

Which chain does the 16B-1 z=45 sprocket fit?

16B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 25.4 mm. A simplex sprocket requires a single-strand (simplex) chain.

Does it fit ASA 80 chain?

No. ASA 80 chain (American standard) has the same pitch and roller diameter, but a different inner width (15.88 mm instead of 17.02 mm). The 16B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How does tooth wear affect machine operation?

Worn teeth make the chain engage the sprocket unevenly and abruptly. This causes vibrations that are passed on to shafts and bearings and accelerate wear of the whole drive.

How do I check the pitch of a sprocket?

The sprocket pitch matches the chain pitch - it is the distance between the centres of adjacent teeth measured on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket: it should sit on the teeth without tension. This sprocket has a pitch of 25.4 mm (1").

How is the pitch diameter of a sprocket calculated?

The pitch diameter Dp is the circle along which the chain rollers travel. It is calculated with the formula: pitch divided by the sine of (180° / number of teeth). For this sprocket it is 364.12 mm, and the outside diameter De is 377.1 mm.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.