Sprocket 12B-3 z=8 with hub

Product Description

Sprocket 12B-3 z=8, with hub

The sprocket 12B-3 shown is a triplex (three-strand) sprocket with 8 teeth, made with a hub, for chain with a pitch of 3/4" / 19.05 mm. The material is C45E carbon steel (EN 10083-1), and the teeth remain unhardened (without induction hardening) - in accordance with DIN 8187 / ISO 606; this version is easier to machine over the entire depth of the sprocket.

Technical data

Frequently asked questions

Does the machine's operating temperature matter when choosing the sprocket material?

Yes - at very low or very high temperatures the mechanical properties of steel or cast iron change, and lubricants may change viscosity or thicken. Under unusual thermal conditions (cold stores, furnaces, dryers), it is advisable to consult the supplier before selecting a specific material variant.

Can a sprocket with a technological bore be installed without additional machining?

No - the technological bore is deliberately too small to fit a typical shaft. It must be bored on a lathe to the required diameter and, if necessary, a keyway cut according to the requirements of the specific machine.

Can I replace a simplex sprocket with a duplex one without changing the other drive components?

No - switching to a duplex chain and sprocket requires replacing the entire set (the sprockets on both sides of the drive and the chain) with a duplex version of the same pitch, because the rim spacing and chain width differ from those of the simplex version.

Can a sprocket be reconditioned, e.g. by hardfacing worn teeth?

Technically, hardfacing and re-milling the teeth is possible, but in practice it is rarely cost-effective - the cost of reconditioning is often close to the price of a new sprocket, and restoring the full precision of the tooth profile requires specialist machining. In most cases, replacing it with a new sprocket is the quicker and safer solution.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.