Sprocket 12B-3 (3/4") z=16 plate wheel, C45 steel

Product Description

Sprocket 12B-3 (3/4") z=16 plate wheel, C45 steel works with 12B-3 roller chain (European standard DIN 8187 / ISO 606), triple-strand (triplex), with a pitch of 19.05 mm (3/4"). It has 16 teeth and is made of C45 steel.

The plate wheel has a pilot bore of Ø16 mm. It can be bolted or welded to your own hub, flange or drum, which makes it a good choice for larger ratios and non-standard designs.

Technical data

Applications

It works well in roller and belt conveyor drives and on packaging lines. The triple-strand version is chosen for very heavily loaded drives where there is no room for a chain with a larger pitch. Plate wheels are often mounted on drums and flanges and in large reduction gears.

Frequently asked questions

Which chain does the 12B-3 z=16 sprocket fit?

12B-3 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 19.05 mm. A triplex sprocket requires a triple-strand (triplex) chain.

Does it fit ASA 60 chain?

No. ASA 60 chain (American standard) has the same pitch, but a different roller diameter (11.91 mm instead of 12.07 mm) and a different inner width (12.7 mm instead of 11.68 mm). The 12B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How do I check the pitch of a sprocket?

The sprocket pitch matches the chain pitch - it is the distance between the centres of adjacent teeth measured on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket: it should sit on the teeth without tension. This sprocket has a pitch of 19.05 mm (3/4").

How is the pitch diameter of a sprocket calculated?

The pitch diameter Dp is the circle along which the chain rollers travel. It is calculated with the formula: pitch divided by the sine of (180° / number of teeth). For this sprocket it is 97.65 mm, and the outside diameter De is 105.5 mm.

When should I choose a plate wheel and when a sprocket with hub?

A plate wheel is chosen when the wheel is fixed to an existing flange, drum or your own hub, or when there is little space on the shaft. A sprocket with hub works better where torque is transmitted directly from the shaft via a key.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.