Sprocket 12B-3 z=114 with hub, Cast iron

Product Description

Sprocket 12B-3 z=114, with cast iron hub

Sprocket 12B-3 (pitch 3/4" - 19.05 mm), triplex (three-strand), 114 teeth, with hub. Cast iron version of the sprocket - the tooth geometry is identical to the steel version with the same pitch and number of teeth; the bore in the hub is a pilot (preliminary) bore, and the exact size is achieved by turning.

Technical data

Frequently asked questions

How does material quality prevent the teeth from "shearing" during sudden machine jerks?

Soft, uncertified sheet metal deforms under a sudden jerk - the teeth bend over. Steel from a certified melt, correctly heat-treated, has a high yield strength and withstands a torque surge without permanent deformation.

How can a sprocket and chain be protected against corrosion during storage?

After cleaning off any dirt, it is advisable to apply a layer of preservative grease or anti-corrosion oil and store the sprocket in a dry place not exposed to condensation. In the steel version (without coating), even a short damp break in the workshop can cause a rusty film on the tooth surfaces.

Why are cast sprockets less precise than turned and milled ones?

Cheap castings have a rough tooth surface, hidden air bubbles and slight deformations. CNC-turned and milled sprockets mean a smooth working surface, perfect alignment and safety for the most expensive machines.

Can I replace a simplex sprocket with a duplex one without changing the other drive components?

No - switching to a duplex chain and sprocket requires replacing the entire set (the sprockets on both sides of the drive and the chain) with a duplex version of the same pitch, because the rim spacing and chain width differ from those of the simplex version.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.