Sprocket 12B-2 z=24 with hub, hardened

Product Description

Sprocket 12B-2 z=24, hardened hub

Sprocket 12B-2, duplex, with 24 teeth and a hardened hub - pitch 3/4" (19.05 mm). Sprocket compliant with DIN 8187 / ISO 606, milled from C45E steel (EN 10083-1); the teeth are induction hardened (45-55 HRC), while the core and hub remain soft, allowing the bore to be safely machined to the shaft size.

Technical data

Frequently asked questions

What does the pitch of a sprocket mean and how can it be checked?

The pitch of a sprocket corresponds to the chain pitch - it is the theoretical distance between the centres of adjacent teeth on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket - it should sit perfectly, without tension.

How does material quality prevent the teeth from "shearing" during sudden machine jerks?

Soft, uncertified sheet metal deforms under a sudden jerk - the teeth bend over. Steel from a certified melt, correctly heat-treated, has a high yield strength and withstands a torque surge without permanent deformation.

What is the relationship between the number of teeth of a sprocket and the rotational speed of the drive?

This is the basic principle of the transmission ratio. If there is a small sprocket on the motor (drive) and a large one on the machine, the machine will turn more slowly but gain proportionally greater torque (force).

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Where is this product used?

Typical applications of the 12B-2 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.