Sprocket 12B-2 z=114 with hub, Cast iron

Product Description

Sprocket 12B-2 z=114, with cast iron hub

Sprocket 12B-2 (pitch 3/4" - 19.05 mm), duplex, 114 teeth, with hub. The material is grey cast iron - an economical solution with good vibration damping that proves itself in drives running at constant speed; the hub has a pilot bore that must be bored out individually to suit the shaft.

Technical data

Frequently asked questions

Is it possible to order a single trial piece of the sprocket before placing a larger order?

Yes, catalogue items can be ordered in any quantity, including a single piece for testing or verification before a larger series order.

How can a sprocket and chain be protected against corrosion during storage?

After cleaning off any dirt, it is advisable to apply a layer of preservative grease or anti-corrosion oil and store the sprocket in a dry place not exposed to condensation. In the steel version (without coating), even a short damp break in the workshop can cause a rusty film on the tooth surfaces.

How do you correctly align sprockets during installation?

The driving and driven sprockets must be in one perfect line. You can use a long steel straightedge placed against the faces of both sprockets or a professional laser alignment tool. Even a slight angular deviation will quickly destroy the chain.

What does the pitch of a sprocket mean and how can it be checked?

The pitch of a sprocket corresponds to the chain pitch - it is the theoretical distance between the centres of adjacent teeth on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket - it should sit perfectly, without tension.

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

Typical applications of the 12B-2 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.