Sprocket 12B-1 z=26 with hub

Product Description

Sprocket 12B-1 z=26, with hub

Simplex sprocket 12B-1 with hub, 26 teeth - designed for chain with a pitch of 3/4" (19.05 mm). Compliance with DIN 8187 / ISO 606 guarantees full interchangeability with a chain of the same pitch; the sprocket is made of C45E steel (EN 10083-1) in a non-hardened version - the standard choice for applications with moderate and medium load.

Technical data

Frequently asked questions

Will a sprocket from another manufacturer work properly with the chain I already have?

If the sprocket is made to the same standard (DIN 8187/ISO 606) and has the same pitch and number of strands, it should work properly with a chain of another brand - that is the purpose of standardisation in this industry. However, differences between manufacturers may concern, for example, hub dimensions or material, so these parameters are worth checking separately.

Can a sprocket with a technological bore be installed without additional machining?

No - the technological bore is deliberately too small to fit a typical shaft. It must be bored on a lathe to the required diameter and, if necessary, a keyway cut according to the requirements of the specific machine.

Can a sprocket be reconditioned, e.g. by hardfacing worn teeth?

Technically, hardfacing and re-milling the teeth is possible, but in practice it is rarely cost-effective - the cost of reconditioning is often close to the price of a new sprocket, and restoring the full precision of the tooth profile requires specialist machining. In most cases, replacing it with a new sprocket is the quicker and safer solution.

What does uneven, one-sided wear of the sprocket teeth indicate?

This usually indicates misalignment between the driving and driven sprockets or that the chain is skewed relative to the sprocket. It is worth checking the alignment of both sprockets and the condition of the shaft bearings - over time, one-sided wear causes the chain to jump off the tooth.

Where is this product used?

Typical applications of the 12B-1 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.