Sprocket 12B-1 z=16 with hub, hardened

Product Description

Sprocket 12B-1 z=16, hardened hub

Sprocket 12B-1 with hardened hub, 16 teeth, simplex - a product matched to chain with a pitch of 19.05 mm (3/4"). Sprocket compliant with DIN 8187 / ISO 606, milled from C45E steel (EN 10083-1); the teeth are induction hardened (45-55 HRC), while the core and hub remain soft, allowing the bore to be safely machined to the shaft size.

Technical data

Frequently asked questions

How do you cut a keyway in the hub of a sprocket?

We cut keyways precisely on slotting machines according to DIN 6885. If you do it yourself, maintain axial alignment and the correct width and depth of the keyway so that the key sits securely and is not sheared off.

What should be used to preserve sprockets before a longer break in operation?

After cleaning with a brush and a technical cleaner, apply preservative grease or a thick, moisture-displacing spray oil to the entire surface of the sprocket. This will protect the carbon steel against a rusty film during a break in the workshop.

What material is this sprocket made of?

As standard, it is carbon steel C45E (EN 10083-1) - a good material for typical industrial applications, providing a good balance between strength and machinability of the hub.

When does tooth wear (the "shark fin" profile) mean the sprocket must be replaced?

If the teeth resemble pointed, tilted shark fins, the sprocket must be replaced immediately. Operating on such a profile can damage even a brand-new chain within a dozen or so days.

Where is this product used?

12B-1 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.