Sprocket 12B-1 z=10 with hub, hardened

Product Description

Sprocket 12B-1 z=10, hardened hub

The sprocket 12B-1 shown is a simplex sprocket with 10 teeth, made with a hardened hub, for chain with a pitch of 3/4" / 19.05 mm. Made in accordance with DIN 8187 / ISO 606, from C45E steel (EN 10083-1), with teeth induction hardened to 45-55 HRC - as a Polish manufacturer, Ozdowski ensures that the hub remains soft and suitable for turning.

Technical data

Frequently asked questions

What should be used to preserve sprockets before a longer break in operation?

After cleaning with a brush and a technical cleaner, apply preservative grease or a thick, moisture-displacing spray oil to the entire surface of the sprocket. This will protect the carbon steel against a rusty film during a break in the workshop.

What causes premature wear of the side faces of the teeth?

This is most often the result of misalignment of the sprockets on the shafts (so-called lateral runout of the drive). The chain does not run straight, and its inner plates catch on the sides of the teeth, wearing them down to bare metal. The system must be realigned immediately.

How do I select a sprocket for a roller chain?

The selected sprocket must match the chain parameters exactly. Pay attention to three things: the standard (European B series), the pitch and the number of strands. The sprocket must have a tooth profile compliant with DIN 8187 so that the chain enters the tooth root smoothly without jamming.

How do you correctly align sprockets during installation?

The driving and driven sprockets must be in one perfect line. You can use a long steel straightedge placed against the faces of both sprockets or a professional laser alignment tool. Even a slight angular deviation will quickly destroy the chain.

Where is this product used?

Typical applications of the 12B-1 sprocket: drives for pumps, mixers and industrial fans, as well as control systems for industrial gates and roller shutters, where resistance to continuous operation is required.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.