Sprocket 10B-2 z=95 with hub, Cast iron

Product Description

Sprocket 10B-2 z=95, with cast iron hub

Sprocket 10B-2, duplex, with 95 teeth and a hub - pitch 5/8" (15.88 mm). The material is grey cast iron - an economical solution with good vibration damping that proves itself in drives running at constant speed; the hub has a pilot bore that must be bored out individually to suit the shaft.

Technical data

Frequently asked questions

What is the relationship between the number of teeth of a sprocket and the rotational speed of the drive?

This is the basic principle of the transmission ratio. If there is a small sprocket on the motor (drive) and a large one on the machine, the machine will turn more slowly but gain proportionally greater torque (force).

How should large-diameter sprockets be transported and stored to prevent deformation?

Large sprockets are best stored and transported lying flat on a level, stable surface, rather than resting on the toothed rim alone, which is more susceptible to local deformation. When lifting, it is advisable to use slings passed through the hub bore rather than hooking them onto individual teeth.

Can a sprocket be welded directly to the drive shaft?

Technically this is possible, but we strongly advise against such a solution. Welding overheats the material, damages nearby bearings, bends the shaft and prevents the worn sprocket from being easily replaced later. Always use mounting with a key or a clamping bush.

How do I select a sprocket for a roller chain?

The selected sprocket must match the chain parameters exactly. Pay attention to three things: the standard (European B series), the pitch and the number of strands. The sprocket must have a tooth profile compliant with DIN 8187 so that the chain enters the tooth root smoothly without jamming.

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Does a cast iron sprocket require a different chain than a steel sprocket of the same pitch?

No - the tooth geometry and pitch are identical to those of the steel version of the same size, so the cast iron sprocket works with the same chain. The difference lies in the material of the hub and rim: cast iron dampens vibrations better and is cheaper, but withstands impacts and operation at high rotational speeds less well than steel.

Where is this product used?

10B-2 sprockets are used in industrial drive transmissions: conveyors, feeders, packaging machines and production lines where precise, repeatable torque transmission matters.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.