Sprocket 10B-1 z=100 with hub

Product Description

Sprocket 10B-1 z=100, with hub

Sprocket 10B-1, simplex, with 100 teeth and a hub - pitch 5/8" (15.88 mm). The sprocket complies with DIN 8187 / ISO 606 and is made of C45E steel (EN 10083-1); the teeth are not hardened, which lowers the cost of the sprocket and makes it easier to machine (e.g. deep boring of the hub) throughout the entire volume of the material.

Technical data

Frequently asked questions

What is the relationship between the number of teeth of a sprocket and the rotational speed of the drive?

This is the basic principle of the transmission ratio. If there is a small sprocket on the motor (drive) and a large one on the machine, the machine will turn more slowly but gain proportionally greater torque (force).

How do you select a sprocket when the machine lacks space for a larger pitch?

In such a situation, a better solution than increasing the pitch is often to use a multi-strand chain and sprocket of the same (smaller) pitch - several strands together carry a greater load without increasing the sprocket diameter.

How do I bore the hole in a sprocket to fit a motor shaft?

A sprocket with a pilot bore should be clamped in a lathe (gripping the hub to avoid runout) and bored to the required diameter with an H7 tolerance. The hub is usually soft and easy to machine, even in the version with hardened teeth.

What should be considered when selecting a sprocket for low-temperature operation?

At low temperatures, carbon steel becomes more susceptible to brittle fracture under impact, so in cold stores and freezers it is worth considering a variant with increased impact strength or consulting the supplier on the choice of material. Equally important is the choice of a lubricant that will not thicken or lose its lubricating properties at low temperature.

Where is this product used?

Applications include drives in the food industry, packaging machines, sorting lines and agricultural harvesting machines, where the sprocket operates seasonally but under full load.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.