Sprocket 08B-3 (1/2") z=38 plate wheel, C45 steel

Product Description

Sprocket 08B-3 (1/2") z=38 plate wheel, C45 steel works with 08B-3 roller chain (European standard DIN 8187 / ISO 606), triple-strand (triplex), with a pitch of 12.7 mm (1/2"). It has 38 teeth and is made of C45 steel.

The plate wheel has a pilot bore of Ø20 mm. It can be bolted or welded to your own hub, flange or drum, which makes it a good choice for larger ratios and non-standard designs.

Technical data

Applications

It works well in light drives: packaging machines, labelling machines and small conveyors. The triple-strand version is chosen for very heavily loaded drives where there is no room for a chain with a larger pitch. Plate wheels are often mounted on drums and flanges and in large reduction gears.

Frequently asked questions

Which chain does the 08B-3 z=38 sprocket fit?

08B-3 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 12.7 mm. A triplex sprocket requires a triple-strand (triplex) chain.

Does it fit ASA 40 chain?

No. ASA 40 chain (American standard) has the same pitch, but a different roller diameter (7.94 mm instead of 8.51 mm) and a different inner width (7.94 mm instead of 7.75 mm). The 08B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How does the number of teeth affect the drive ratio?

The ratio is the number of teeth of the driven wheel divided by the number of teeth of the driving wheel. If this sprocket drives a wheel with twice as many teeth, the driven shaft turns twice as slowly but with roughly twice the torque.

How should sprockets be aligned during installation?

The driving and driven sprockets must lie in one plane. Alignment can be checked with a long steel straightedge placed against the sides of both wheels or with a laser alignment tool. Even a small misalignment wears the sides of the teeth and speeds up chain wear.

When does a sprocket need replacing?

It should be replaced when the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.