Sprocket 08B-2 (1/2") z=64 with hub, steel
Available product promotions:
-
Weight10,1kg
-
UPC Code5907009309309
Product Description
Sprocket 08B-2 (1/2") z=64 with hub, steel fits 08B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 12.7 mm (1/2"). It has 64 teeth and is made of steel.
The sprocket has a hub with a pilot bore, which is bored to the shaft size and completed with a keyway or a set screw hole.
Technical data
| Chain | 08B-2 (DIN 8187 / ISO 606) |
| Pitch | 12.7 mm (1/2") |
| Chain inner width | 7.75 mm |
| Roller diameter | 8.51 mm |
| Number of teeth | 64 |
| Pitch diameter Dp | 258.83 mm |
| Type | sprocket with hub |
| Material | steel |
| Weight | 10.1 kg |
| EAN | 5907009309309 |
Applications
It works in small chain transmissions, feeders and traverse mechanisms where a compact design matters. The double-strand version carries higher loads than a single-strand one of the same pitch.
Frequently asked questions
Which chain does the 08B-2 z=64 sprocket fit?
08B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 12.7 mm. A duplex sprocket requires a double-strand (duplex) chain.
Does it fit ASA 40 chain?
No. ASA 40 chain (American standard) has the same pitch, but a different roller diameter (7.94 mm instead of 8.51 mm) and a different inner width (7.94 mm instead of 7.75 mm). The 08B sprocket is designed for European-standard chain, so the two systems should not be mixed.
How is a keyway cut in the hub?
The keyway is made to DIN 6885, keeping it aligned and with the correct width and depth so that the key sits firmly. The key should fit accurately - play in the keyway accelerates wear and, under shock loads, can lead to the key shearing off.
What is the set screw hole in the hub for?
The threaded hole, usually made above the keyway or at 90° to it, takes a headless set screw. It prevents the sprocket from sliding along the shaft when the machine vibrates.
Can a sprocket with hub be welded to the shaft?
Technically it is possible, but we do not recommend it. Welding overheats the material, can bend the shaft and damage nearby bearings, and makes later replacement of a worn sprocket very difficult. It is better to fix the sprocket with a key.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight10,1kg
-
UPC Code5907009309309