Sprocket 08B-2 z=18 with hub, hardened

Product Description

Sprocket 08B-2 z=18, hardened hub

Duplex sprocket 08B-2 with hardened hub, 18 teeth - dedicated to a chain with a pitch of 1/2" (12.7 mm). The material is carbon steel C45E (EN 10083-1), and the teeth undergo induction hardening to 45-55 HRC - in accordance with DIN 8187 / ISO 606; the hub retains a lower core hardness, so it can be machined safely.

Technical data

Frequently asked questions

How does induction hardening of the teeth affect abrasion resistance?

Induction hardening hardens only the surface layer of the tooth, where the chain rollers bear. The tooth is resistant to wear, while the sprocket core and hub remain elastic enough to safely absorb impacts and be suitable for boring.

When should I choose a sprocket with hub and when a flat one (plate wheel)?

Flat sprockets (plate wheels) are most often used where they are mounted onto an existing flange or drum, or when there is extremely little space on the shaft. We choose a sprocket with hub when it must reliably transmit high torque directly from the shaft via a key - the hub provides a longer contact surface.

How do you cut a keyway in the hub of a sprocket?

We cut keyways precisely on slotting machines according to DIN 6885. If you do it yourself, maintain axial alignment and the correct width and depth of the keyway so that the key sits securely and is not sheared off.

Is a duplex sprocket the same as a tandem sprocket (for two single chains)?

No, even though they look very similar. A tandem sprocket is also a single, monolithic sprocket, but with a different (wider) spacing of the toothed rims - designed specifically for two independent simplex chains running in parallel. This duplex sprocket has a rim spacing matched to a single duplex chain, in which both strands are integrated with each other. Using a duplex sprocket for two single chains is a mistake - the spacing is too narrow and the chains will rub against each other, which leads to accelerated wear and, in extreme cases, to serious drive failure.

Where is this product used?

This type of sprocket is used in drives of agricultural and industrial machinery, including screw and bucket conveyors, feed conveyors, packaging machines and internal transport systems.

When placing your order, please check the current stock level of this gear - the lead time depends on it and is clearly stated according to the quantity available in the given warehouse.

Product photos are for illustrative purposes only.