Sprocket 08B-1 (1/2") z=21 with hub, bore 30 mm with keyway, C45 steel
Available product promotions:
-
Weight0,85kg
-
UPC Code5908453504173
Product Description
Sprocket 08B-1 (1/2") z=21 with hub, bore 30 mm with keyway, C45 steel works with 08B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 12.7 mm (1/2"). It has 21 teeth and is made of C45 steel.
The sprocket has a hub with a finished bore of 30 mm and a keyway, so it can be fitted straight onto a shaft of this diameter - without boring the hole or cutting a keyway. The hub diameter is 68 mm and the total width of the sprocket is 28 mm.
Technical data
| Chain | 08B-1 (DIN 8187 / ISO 606) |
| Pitch | 12.7 mm (1/2") |
| Chain inner width | 7.75 mm |
| Roller diameter | 8.51 mm |
| Number of teeth | 21 |
| Pitch diameter Dp | 85.22 mm |
| Outside diameter De | 89.7 mm |
| Type | sprocket with hub |
| Bore | 30 mm with keyway |
| Hub diameter d | 68 mm |
| Total width H | 28 mm |
| Tooth width | 7.2 mm |
| Material | C45 steel |
| Weight | 0.85 kg |
| EAN | 5908453504173 |
Applications
It suits go-karts, recreational vehicles and small garden machinery.
Frequently asked questions
Which chain does the 08B-1 z=21 sprocket fit?
08B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 12.7 mm. A simplex sprocket requires a single-strand (simplex) chain.
Which shaft does this sprocket fit?
The sprocket has a finished bore of 30 mm with a keyway, so it is mounted on a 30 mm shaft with a key. Before ordering, it is worth measuring the shaft carefully with a caliper in several places.
Does it fit ASA 40 chain?
No. ASA 40 chain (American standard) has the same pitch, but a different roller diameter (7.94 mm instead of 8.51 mm) and a different inner width (7.94 mm instead of 7.75 mm). The 08B sprocket is designed for European-standard chain, so the two systems should not be mixed.
What causes wear on the sides of the teeth?
Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.
How do I check sprocket run-out after installation?
A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight0,85kg
-
UPC Code5908453504173