Sprocket 06B-2 (3/8") z=114 with hub, cast iron

Product Description

Sprocket 06B-2 (3/8") z=114 with hub, cast iron fits 06B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 9.525 mm (3/8"). It has 114 teeth and is made of EN-GJL-250 cast iron.

The sprocket has a one-sided hub with a diameter of 95 mm and a pilot bore of Ø19 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 45 mm.

Technical data

Applications

It works well in light drives: packaging machines, labelling machines and small conveyors. The double-strand version carries higher loads than a single-strand one of the same pitch. The cast iron design works well for large sprockets in reduction gears, where rigidity and vibration damping matter.

Frequently asked questions

Which chain does the 06B-2 z=114 sprocket fit?

06B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 9.525 mm. A duplex sprocket requires a double-strand (duplex) chain.

Does it fit ASA 35 chain?

No. ASA 35 chain (American standard) has the same pitch, but a different roller diameter (5.08 mm instead of 6.35 mm) and a different inner width (4.77 mm instead of 5.72 mm). The 06B sprocket is designed for European-standard chain, so the two systems should not be mixed.

How do I check the pitch of a sprocket?

The sprocket pitch matches the chain pitch - it is the distance between the centres of adjacent teeth measured on the pitch circle. The easiest way to check it is to place a section of matching chain on the sprocket: it should sit on the teeth without tension. This sprocket has a pitch of 9.525 mm (3/8").

How is the pitch diameter of a sprocket calculated?

The pitch diameter Dp is the circle along which the chain rollers travel. It is calculated with the formula: pitch divided by the sine of (180° / number of teeth). For this sprocket it is 345.68 mm, and the outside diameter De is 349.6 mm.

When should I choose a sprocket with hub and when a plate wheel?

A sprocket with hub is chosen when it transmits torque directly from the shaft via a key - the hub provides a longer contact surface with the shaft and a more stable fit. Plate wheels are used mainly when the wheel is fixed to an existing flange or drum, or when there is little space on the shaft.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.