Log in

Price Inquiry

New Cart 0 €

Your cart is empty

Sprocket 06B-1 (3/8") z=32 with hub, bore 20 mm with keyway, C45 steel

Availability:
Shipping from €

Available product promotions:

Added To Cart

  • Weight
    1kg
  • UPC Code
    5908453502865
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm
  • Product Description
  • Product Features
  • Add to the product comparison toolCompare
Added to the product comparison tool
You may add 2 to 4 products
You may add 4 products maximum
Go to Comparison Tool

Product Description

Sprocket 06B-1 (3/8") z=32 with hub, bore 20 mm with keyway, C45 steel is designed for 06B-1 roller chain (European standard DIN 8187 / ISO 606), single-strand (simplex), with a pitch of 9.525 mm (3/8"). It has 32 teeth and is made of C45 steel.

The sprocket has a hub with a finished bore of 20 mm and a keyway, so it can be fitted straight onto a shaft of this diameter - without boring the hole or cutting a keyway.

Technical data

Chain06B-1 (DIN 8187 / ISO 606)
Pitch9.525 mm (3/8")
Chain inner width5.72 mm
Roller diameter6.35 mm
Number of teeth32
Pitch diameter Dp97.17 mm
Outside diameter De101.3 mm
Typesprocket with hub
Bore20 mm with keyway
MaterialC45 steel
Weight1 kg
EAN5908453502865

Applications

It is found in textile machinery, gate and roller shutter drives and workshop equipment.

Frequently asked questions

Which chain does the 06B-1 z=32 sprocket fit?

06B-1 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 9.525 mm. A simplex sprocket requires a single-strand (simplex) chain.

Which shaft does this sprocket fit?

The sprocket has a finished bore of 20 mm with a keyway, so it is mounted on a 20 mm shaft with a key. Before ordering, it is worth measuring the shaft carefully with a caliper in several places.

Does it fit ASA 35 chain?

No. ASA 35 chain (American standard) has the same pitch, but a different roller diameter (5.08 mm instead of 6.35 mm) and a different inner width (4.77 mm instead of 5.72 mm). The 06B sprocket is designed for European-standard chain, so the two systems should not be mixed.

What causes wear on the sides of the teeth?

Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.

How do I check sprocket run-out after installation?

A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.

Product Features

  • Weight
    1kg
  • UPC Code
    5908453502865
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm

Responsible Entity

Manufacturer

Ozdowski Sp. z o.o.

Zajęcza 4H

57-300 Kłodzko, Poland

Responsible Person

Paweł Ozdowski

Zajęcza 4H

57-300 Kłodzko, Poland