Sprocket 05B-2 z=31 with hub, C45 steel
Available product promotions:
-
Weight0,55kg
-
UPC Code5907009382982
Product Description
Sprocket 05B-2 z=31 with hub, C45 steel fits 05B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 8 mm. It has 31 teeth and is made of C45 steel.
The sprocket has a one-sided hub with a diameter of 60 mm and a pilot bore of Ø12 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 22 mm.
Technical data
| Chain | 05B-2 (DIN 8187 / ISO 606) |
| Pitch | 8 mm |
| Chain inner width | 3 mm |
| Roller diameter | 5 mm |
| Number of teeth | 31 |
| Pitch diameter Dp | 79.08 mm |
| Outside diameter De | 82.4 mm |
| Type | sprocket with hub |
| Hub diameter d | 60 mm |
| Pilot bore D | 12 mm |
| Total width H | 22 mm |
| Tooth width | 8.3 mm |
| Material | C45 steel |
| Weight | 0.55 kg |
| EAN | 5907009382982 |
Applications
It suits go-karts, recreational vehicles and small garden machinery. The double-strand version carries higher loads than a single-strand one of the same pitch.
Frequently asked questions
Which chain does the 05B-2 z=31 sprocket fit?
05B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 8 mm. A duplex sprocket requires a double-strand (duplex) chain.
What causes wear on the sides of the teeth?
Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.
How do I check sprocket run-out after installation?
A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.
How does tooth wear affect machine operation?
Worn teeth make the chain engage the sprocket unevenly and abruptly. This causes vibrations that are passed on to shafts and bearings and accelerate wear of the whole drive.
When are multi-strand sprockets used?
Double- and triple-strand sprockets work with multi-strand chains in heavily loaded drives where there is no room for a chain with a larger pitch. Several strands share the load evenly, which reduces wear and the risk of chain breakage.
What does the lead time depend on?
When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.
Product photos are for illustration purposes only.
Product Features
-
Weight0,55kg
-
UPC Code5907009382982