Log in

Price Inquiry

New Cart 0 €

Your cart is empty

Sprocket 05B-2 z=20 with hub, C45 steel

Availability:
5,03 €
total
4,09 €
subtotal
Shipping from €
szt
Enter quantity
Quantity must be included in range 0,01 - 399
Quantity cannot be more than 399

Available product promotions:

Added To Cart
Added to the price inquiry
You may add more products to your price inquiry
Added To Cart
Added to the price inquiry

  • Weight
    0,215kg
  • UPC Code
    5907009382883
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm
  • Product Description
  • Product Features
  • Add to the product comparison toolCompare
Added to the product comparison tool
You may add 2 to 4 products
You may add 4 products maximum
Go to Comparison Tool

Product Description

Sprocket 05B-2 z=20 with hub, C45 steel works with 05B-2 roller chain (European standard DIN 8187 / ISO 606), double-strand (duplex), with a pitch of 8 mm. It has 20 teeth and is made of C45 steel.

The sprocket has a one-sided hub with a diameter of 40 mm and a pilot bore of Ø10 mm, which is bored to the shaft size and completed with a keyway or a set screw hole. The total width of the sprocket is 20 mm.

Technical data

Chain05B-2 (DIN 8187 / ISO 606)
Pitch8 mm
Chain inner width3 mm
Roller diameter5 mm
Number of teeth20
Pitch diameter Dp51.14 mm
Outside diameter De54.4 mm
Typesprocket with hub
Hub diameter d40 mm
Pilot bore D10 mm
Total width H20 mm
Tooth width8.3 mm
MaterialC45 steel
Weight0.215 kg
EAN5907009382883

Applications

It is found in textile machinery, gate and roller shutter drives and workshop equipment. The double-strand version carries higher loads than a single-strand one of the same pitch.

Frequently asked questions

Which chain does the 05B-2 z=20 sprocket fit?

05B-2 roller chain to European standard DIN 8187 / ISO 606, with a pitch of 8 mm. A duplex sprocket requires a double-strand (duplex) chain.

When does a sprocket need replacing?

It should be replaced when the teeth start to look like pointed shark fins or are clearly bent to one side. Running on such a profile quickly destroys even a new chain, so a worn sprocket must be replaced.

Can a new chain be fitted on a worn sprocket?

This should not be done. A worn sprocket has a changed tooth profile, so a new chain runs unevenly and elongates quickly. The rule is: new chain - new sprockets.

What causes wear on the sides of the teeth?

Most often misaligned sprockets. The chain does not run straight and its plates rub against the sides of the teeth. In this case the sprockets must be realigned in one plane.

How do I check sprocket run-out after installation?

A dial indicator on a magnetic stand is used. Place the tip against the rim or side of the sprocket and turn the shaft, reading the deviations. Excessive run-out usually means a crooked bore or a damaged shaft.

What does the lead time depend on?

When ordering, please check the current stock level of this sprocket - the lead time depends on it and is clearly stated according to the quantity available in each warehouse. The stock level is shown above the product price and may vary depending on the warehouse.

Product photos are for illustration purposes only.

Product Features

  • Weight
    0,215kg
  • UPC Code
    5907009382883
  • Height
    0 cm
  • Length
    0 cm
  • Width
    0 cm

Responsible Entity

Manufacturer

Ozdowski Sp. z o.o.

Zajęcza 4H

57-300 Kłodzko, Poland

Responsible Person

Paweł Ozdowski

Zajęcza 4H

57-300 Kłodzko, Poland