Roller chain 10AH-1 (50H-1) reinforced 2m section - connecting link included | Ozdowski

Product Description

Roller chain 10AH-1 (50H-1) L=2000

The 10AH-1 chain is a simplex American chain proven in maintenance, chain number 50H, pitch 15.875 mm. Every unit in this series meets the requirements of the standard ANSI B29.1; production includes individual hardening of the pin, roller and plate, which we, as a Polish manufacturer, regard as the basis of durability. In Ozdowski chains, each component is hardened separately before being assembled into a finished link - which is why their actual strength exceeds the requirements of the standard by about 20%, meaning greater durability and resistance to breaking.

Technical data

Frequently asked questions

How do you choose the correct ANSI roller chain pitch for a drive?

Three parameters determine the correct selection: pitch, inner width and roller diameter - for 10AH (ANSI 50H) they are 15.875 mm, 9.4 mm and 10.16 mm respectively. It is also worth considering the load, rotational speed and operating environment (dust, moisture) in order to choose the right version.

How does an AH (reinforced) chain differ from the standard version of the same pitch?

The AH version has the same pitch, inner width and roller diameter dimensions as the standard 10A (it works with the same sprockets), but uses thicker side plates - 2.4 mm compared with 2.0 mm in the standard version. As a result, the chain copes better with jerky loads and operation in more demanding conditions.

Can a section length other than the standard lengths listed be ordered?

Yes. As standard, we offer ready, convenient sections in lengths of 1, 2, 3, 4 and 5 metres, but the chain can also be ordered by the running metre, or several sections can be joined with a connecting link to obtain the required total length - remembering to keep an even number of links.

Which lubricant should be chosen for a chain operating at high temperature?

Under such conditions, standard lubricant quickly loses its properties or carbonises. Dedicated synthetic lubricants with added graphite or molybdenum disulphide (MoS2), which retain their lubricity at higher temperatures, perform better.

Where is this product used?

The reinforced version of this pitch is used in balers (pick-up and bale ejector drives) and in maize harvesters - where a standard 10A chain might not withstand the jerky loads typical of field work.

Product photos are for illustrative purposes only.