Log in
OZDOWSKI Sp. z o.o.

Price Inquiry
New Cart 0 €

Your cart is empty

Filter

Sorting

  • Top Sellers
  • Most Viewed
  • Name (A-Z)
  • Name (Z-A)
  • Price by Ascending
  • Price by Descending
  • Manufacturer (A-Z)
  • Default
  • Recently Added
  • Recently Modified
Name (A-Z)
PILOT BORE
PILOT BORE
FOR TAPER-LOCK
FOR TAPER-LOCK

HTD 14M timing pulleys

14M timing pulleys work with HTD 14M belts with a rounded tooth and a 14 mm pitch. This is the largest HTD profile in our range, designed for heavy drives: presses, crushers, agricultural and construction machinery, and large fans and pumps.

HTD 14M timing pulleys - high power without lubrication and with minimal belt elongation

A 14M drive transmits high power without lubrication and without the elongation typical of chains - fewer inspections and less downtime. The rounded HTD tooth copes well with start-up loads. Smaller pulleys are made of C45 steel, and larger ones of grey cast iron, which dampens vibration. For large, heavy pulleys, the Taper-Lock version significantly shortens replacement time.

HTD 14M timing belt pulleys for belts of various widths

14M pulleys for several belt widths, in the Pilot bore and Taper-Lock subgroups. The belt width is given in the pulley name, and the other dimensions on the product page. 14M belts can be found in the Timing belts category.

Frequently asked questions about HTD 14M synchronous pulleys

Why are there no very small pulleys in the 14M profile?

The thick 14M belt would bend too much on a small pulley, which would shorten its life. That is why the smallest 14M pulleys have a relatively high number of teeth.

Does a 14M pulley fit a PolyChain 14MGT belt?

No. The pitch is the same, but the tooth profile is different. Pulleys from the PolyChain 14MGT timing pulleys group are designed for PolyChain belts.

Failed to add some of the products to cart.

Recommended

Name and Code
In Stock
Price total
Change Cart
Timing belt pulley 14M 55 z=48 for Taper-Lock bush 3020 Steel

Timing belt pulley 14M 55 z=48 for Taper-Lock bush 3020 Steel

Timing pulley 14M 48 teeth, belt width 55 mm. Pitch 14 mm, material: C45 steel, mounting: Taper-Lock 3020. Stock level shown above the product price.
Timing pulley 14M 48 teeth, belt width 55 mm. Pitch 14 mm, material: C45 steel, mounting: Taper-Lock 3020. Stock level shown above the product price.
Weight
11,15 kg
In Stock
135
In Stock:
135

125,73 €

total
Total (total)

125,73 €

Enter quantity
Quantity must be included in range 0,01 - 135
Quantity cannot be more than 135
szt
Change Cart
Timing belt pulley 14M 55 z=56 Cast iron

Timing belt pulley 14M 55 z=56 Cast iron

Timing pulley 14M 56 teeth, belt width 55 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Timing pulley 14M 56 teeth, belt width 55 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Weight
14,5 kg
In Stock
91
In Stock:
91

202,69 €

total
Total (total)

202,69 €

Enter quantity
Quantity must be included in range 0,01 - 91
Quantity cannot be more than 91
szt
Change Cart
Timing belt pulley 14M 55 z=56 for Taper-Lock bush 3020 Steel

Timing belt pulley 14M 55 z=56 for Taper-Lock bush 3020 Steel

14M z=56 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 55 mm, C45 steel. Mounting: Taper-Lock 3020.
14M z=56 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 55 mm, C45 steel. Mounting: Taper-Lock 3020.
Weight
13,52 kg
In Stock
88
In Stock:
88

166,78 €

total
Total (total)

166,78 €

Enter quantity
Quantity must be included in range 0,01 - 88
Quantity cannot be more than 88
szt
Change Cart
Timing belt pulley 14M 55 z=64 Cast iron

Timing belt pulley 14M 55 z=64 Cast iron

14M z=64 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 55 mm, cast iron. Mounting: pilot bore.
14M z=64 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 55 mm, cast iron. Mounting: pilot bore.
Weight
15,6 kg
In Stock
86
In Stock:
86

231,03 €

total
Total (total)

231,03 €

Enter quantity
Quantity must be included in range 0,01 - 86
Quantity cannot be more than 86
szt
Change Cart
Timing belt pulley 14M 55 z=64 for Taper-Lock bush 3020 Steel

Timing belt pulley 14M 55 z=64 for Taper-Lock bush 3020 Steel

Pulley 14M z=64, pitch 14 mm, width 55 mm. Material: C45 steel. Mounting: Taper-Lock 3020.
Pulley 14M z=64, pitch 14 mm, width 55 mm. Material: C45 steel. Mounting: Taper-Lock 3020.
Weight
15,62 kg
In Stock
76
In Stock:
76

225,03 €

total
Total (total)

225,03 €

Enter quantity
Quantity must be included in range 0,01 - 76
Quantity cannot be more than 76
szt
Change Cart
Timing belt pulley 14M 55 z=72 Cast iron

Timing belt pulley 14M 55 z=72 Cast iron

Pulley 14M z=72, pitch 14 mm, width 55 mm. Material: cast iron. Mounting: pilot bore.
Pulley 14M z=72, pitch 14 mm, width 55 mm. Material: cast iron. Mounting: pilot bore.
Weight
16,9 kg
In Stock
62
In Stock:
62

241,56 €

total
Total (total)

241,56 €

Enter quantity
Quantity must be included in range 0,01 - 62
Quantity cannot be more than 62
szt
Change Cart
Timing belt pulley 14M 55 z=72 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 55 z=72 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M z=72, width 55 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3020. Stock level shown above the price.
Timing belt pulley 14M z=72, width 55 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3020. Stock level shown above the price.
Weight
18,04 kg
In Stock
27
In Stock:
27

261,92 €

total
Total (total)

261,92 €

Enter quantity
Quantity must be included in range 0,01 - 27
Quantity cannot be more than 27
szt
Change Cart
Timing belt pulley 14M 55 z=80 Cast iron

Timing belt pulley 14M 55 z=80 Cast iron

Timing belt pulley 14M z=80, width 55 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley 14M z=80, width 55 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: pilot bore. Stock level shown above the price.
Weight
20 kg
In Stock
94
In Stock:
94

252,04 €

total
Total (total)

252,04 €

Enter quantity
Quantity must be included in range 0,01 - 94
Quantity cannot be more than 94
szt
Change Cart
Timing belt pulley 14M 55 z=80 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 55 z=80 for Taper-Lock bush 3020 Cast iron

Timing pulley 14M 80 teeth, belt width 55 mm. Pitch 14 mm, material: cast iron, mounting: Taper-Lock 3020. Stock level shown above the product price.
Timing pulley 14M 80 teeth, belt width 55 mm. Pitch 14 mm, material: cast iron, mounting: Taper-Lock 3020. Stock level shown above the product price.
Weight
19,96 kg
In Stock
27
In Stock:
27

262,68 €

total
Total (total)

262,68 €

Enter quantity
Quantity must be included in range 0,01 - 27
Quantity cannot be more than 27
szt
Change Cart
Timing belt pulley 14M 55 z=90 Cast iron

Timing belt pulley 14M 55 z=90 Cast iron

Timing pulley 14M 90 teeth, belt width 55 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Timing pulley 14M 90 teeth, belt width 55 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Weight
22,6 kg
In Stock
40
In Stock:
40

271,44 €

total
Total (total)

271,44 €

Enter quantity
Quantity must be included in range 0,01 - 40
Quantity cannot be more than 40
szt
Change Cart
Timing belt pulley 14M 55 z=90 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 55 z=90 for Taper-Lock bush 3020 Cast iron

14M z=90 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 55 mm, cast iron. Mounting: Taper-Lock 3020.
14M z=90 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 55 mm, cast iron. Mounting: Taper-Lock 3020.
Weight
21,94 kg
In Stock
75
In Stock:
75

289,89 €

total
Total (total)

289,89 €

Enter quantity
Quantity must be included in range 0,01 - 75
Quantity cannot be more than 75
szt
Change Cart
Timing belt pulley 14M 85 z=112 for Taper-Lock bush 3525 Cast iron

Timing belt pulley 14M 85 z=112 for Taper-Lock bush 3525 Cast iron

Timing belt pulley 14M z=112, width 85 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3525. Stock level shown above the price.
Timing belt pulley 14M z=112, width 85 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3525. Stock level shown above the price.
Weight
40,7 kg
In Stock
43
In Stock:
43

477,82 €

total
Total (total)

477,82 €

Enter quantity
Quantity must be included in range 0,01 - 43
Quantity cannot be more than 43
szt
Change Cart
Timing belt pulley 14M 85 z=144 Cast iron

Timing belt pulley 14M 85 z=144 Cast iron

14M z=144 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 85 mm, cast iron. Mounting: pilot bore.
14M z=144 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 85 mm, cast iron. Mounting: pilot bore.
Weight
52,4 kg
In Stock
13
In Stock:
13

673,55 €

total
Total (total)

673,55 €

Enter quantity
Quantity must be included in range 0,01 - 13
Quantity cannot be more than 13
szt
Change Cart
Timing belt pulley 14M 85 z=144 for Taper-Lock bush 3525 Cast iron

Timing belt pulley 14M 85 z=144 for Taper-Lock bush 3525 Cast iron

Timing pulley 14M 144 teeth, belt width 85 mm. Pitch 14 mm, material: cast iron, mounting: Taper-Lock 3525. Stock level shown above the product price.
Timing pulley 14M 144 teeth, belt width 85 mm. Pitch 14 mm, material: cast iron, mounting: Taper-Lock 3525. Stock level shown above the product price.
Weight
66,7 kg
In Stock
29
In Stock:
29

674,02 €

total
Total (total)

674,02 €

Enter quantity
Quantity must be included in range 0,01 - 29
Quantity cannot be more than 29
szt
Change Cart
Timing belt pulley 14M 85 z=168 for Taper-Lock bush 3525 Cast iron

Timing belt pulley 14M 85 z=168 for Taper-Lock bush 3525 Cast iron

14M z=168 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 85 mm, cast iron. Mounting: Taper-Lock 3525.
14M z=168 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 85 mm, cast iron. Mounting: Taper-Lock 3525.
Weight
60 kg
In Stock
41
In Stock:
41

877,02 €

total
Total (total)

877,02 €

Enter quantity
Quantity must be included in range 0,01 - 41
Quantity cannot be more than 41
szt
Change Cart
Timing belt pulley 14M 85 z=192 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M 85 z=192 for Taper-Lock bush 4040 Cast iron

Pulley 14M z=192, pitch 14 mm, width 85 mm. Material: cast iron. Mounting: Taper-Lock 4040.
Pulley 14M z=192, pitch 14 mm, width 85 mm. Material: cast iron. Mounting: Taper-Lock 4040.
Weight
86 kg
In Stock
16
In Stock:
16

1 248,93 €

total
Total (total)

1 248,93 €

Enter quantity
Quantity must be included in range 0,01 - 16
Quantity cannot be more than 16
szt
Change Cart
Timing belt pulley 14M 85 z=216 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M 85 z=216 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M z=216, width 85 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 4040. Stock level shown above the price.
Timing belt pulley 14M z=216, width 85 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 4040. Stock level shown above the price.
Weight
91,5 kg
In Stock
3
In Stock:
3

1 587,03 €

total
Total (total)

1 587,03 €

Enter quantity
Quantity must be included in range 0,01 - 3
Quantity cannot be more than 3
szt
Change Cart
Timing belt pulley 14M 85 z=28 for Taper-Lock bush 2517 Steel

Timing belt pulley 14M 85 z=28 for Taper-Lock bush 2517 Steel

Timing pulley 14M 28 teeth, belt width 85 mm. Pitch 14 mm, material: C45 steel, mounting: Taper-Lock 2517. Stock level shown above the product price.
Timing pulley 14M 28 teeth, belt width 85 mm. Pitch 14 mm, material: C45 steel, mounting: Taper-Lock 2517. Stock level shown above the product price.
Weight
3,04 kg
In Stock
94
In Stock:
94

54,28 €

total
Total (total)

54,28 €

Enter quantity
Quantity must be included in range 0,01 - 94
Quantity cannot be more than 94
szt
Change Cart
Timing belt pulley 14M 85 z=28 steel

Timing belt pulley 14M 85 z=28 steel

Pulley 14M z=28, pitch 14 mm, width 85 mm. Material: C45 steel. Mounting: pilot bore.
Pulley 14M z=28, pitch 14 mm, width 85 mm. Material: C45 steel. Mounting: pilot bore.
Weight
7,7 kg
In Stock
332
In Stock:
332

61,68 €

total
Total (total)

61,68 €

Enter quantity
Quantity must be included in range 0,01 - 332
Quantity cannot be more than 332
szt
Change Cart
Timing belt pulley 14M 85 z=29 for Taper-Lock bush 2517 Steel

Timing belt pulley 14M 85 z=29 for Taper-Lock bush 2517 Steel

14M z=29 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 85 mm, C45 steel. Mounting: Taper-Lock 2517.
14M z=29 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 85 mm, C45 steel. Mounting: Taper-Lock 2517.
Weight
3,56 kg
In Stock
9
In Stock:
9

59,94 €

total
Total (total)

59,94 €

Enter quantity
Quantity must be included in range 0,01 - 9
Quantity cannot be more than 9
szt
Change Cart
Added To Cart
Added To Cart
Added To Cart