Log in
OZDOWSKI Sp. z o.o.

Price Inquiry
New Cart 0 €

Your cart is empty

Filter

Sorting

  • Top Sellers
  • Most Viewed
  • Name (A-Z)
  • Name (Z-A)
  • Price by Ascending
  • Price by Descending
  • Manufacturer (A-Z)
  • Default
  • Recently Added
  • Recently Modified
Name (A-Z)
PILOT BORE
PILOT BORE
FOR TAPER-LOCK
FOR TAPER-LOCK

HTD 14M timing pulleys

14M timing pulleys work with HTD 14M belts with a rounded tooth and a 14 mm pitch. This is the largest HTD profile in our range, designed for heavy drives: presses, crushers, agricultural and construction machinery, and large fans and pumps.

HTD 14M timing pulleys - high power without lubrication and with minimal belt elongation

A 14M drive transmits high power without lubrication and without the elongation typical of chains - fewer inspections and less downtime. The rounded HTD tooth copes well with start-up loads. Smaller pulleys are made of C45 steel, and larger ones of grey cast iron, which dampens vibration. For large, heavy pulleys, the Taper-Lock version significantly shortens replacement time.

HTD 14M timing belt pulleys for belts of various widths

14M pulleys for several belt widths, in the Pilot bore and Taper-Lock subgroups. The belt width is given in the pulley name, and the other dimensions on the product page. 14M belts can be found in the Timing belts category.

Frequently asked questions about HTD 14M synchronous pulleys

Why are there no very small pulleys in the 14M profile?

The thick 14M belt would bend too much on a small pulley, which would shorten its life. That is why the smallest 14M pulleys have a relatively high number of teeth.

Does a 14M pulley fit a PolyChain 14MGT belt?

No. The pitch is the same, but the tooth profile is different. Pulleys from the PolyChain 14MGT timing pulleys group are designed for PolyChain belts.

Failed to add some of the products to cart.

Recommended

Name and Code
In Stock
Price total
Change Cart
Timing belt pulley 14M 170 z=48 for Taper-Lock bush 3535 Steel

Timing belt pulley 14M 170 z=48 for Taper-Lock bush 3535 Steel

Pulley 14M z=48, pitch 14 mm, width 170 mm. Material: C45 steel. Mounting: Taper-Lock 3535.
Pulley 14M z=48, pitch 14 mm, width 170 mm. Material: C45 steel. Mounting: Taper-Lock 3535.
Weight
22,5 kg
In Stock
9
In Stock:
9

286,77 €

total
Total (total)

286,77 €

Enter quantity
Quantity must be included in range 0,01 - 9
Quantity cannot be more than 9
szt
Change Cart
Timing belt pulley 14M 170 z=48 steel

Timing belt pulley 14M 170 z=48 steel

Timing pulley 14M 48 teeth, belt width 170 mm. Pitch 14 mm, material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley 14M 48 teeth, belt width 170 mm. Pitch 14 mm, material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
44,5 kg
In Stock
28
In Stock:
28

305,59 €

total
Total (total)

305,59 €

Enter quantity
Quantity must be included in range 0,01 - 28
Quantity cannot be more than 28
szt
Change Cart
Timing belt pulley 14M 170 z=56 for Taper-Lock bush 3535 Steel

Timing belt pulley 14M 170 z=56 for Taper-Lock bush 3535 Steel

Timing belt pulley 14M z=56, width 170 mm, C45 steel. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3535. Stock level shown above the price.
Timing belt pulley 14M z=56, width 170 mm, C45 steel. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3535. Stock level shown above the price.
Weight
28,5 kg
In Stock
17
In Stock:
17

396,38 €

total
Total (total)

396,38 €

Enter quantity
Quantity must be included in range 0,01 - 17
Quantity cannot be more than 17
szt
Change Cart
Timing belt pulley 14M 170 z=56 steel

Timing belt pulley 14M 170 z=56 steel

14M z=56 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 170 mm, C45 steel. Mounting: pilot bore.
14M z=56 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 170 mm, C45 steel. Mounting: pilot bore.
Weight
61 kg
In Stock
9
In Stock:
9

418,29 €

total
Total (total)

418,29 €

Enter quantity
Quantity must be included in range 0,01 - 9
Quantity cannot be more than 9
szt
Change Cart
Timing belt pulley 14M 170 z=64 for Taper-Lock bush 4040 Steel

Timing belt pulley 14M 170 z=64 for Taper-Lock bush 4040 Steel

Timing pulley 14M 64 teeth, belt width 170 mm. Pitch 14 mm, material: C45 steel, mounting: Taper-Lock 4040. Stock level shown above the product price.
Timing pulley 14M 64 teeth, belt width 170 mm. Pitch 14 mm, material: C45 steel, mounting: Taper-Lock 4040. Stock level shown above the product price.
Weight
41 kg
In Stock
13
In Stock:
13

526,46 €

total
Total (total)

526,46 €

Enter quantity
Quantity must be included in range 0,01 - 13
Quantity cannot be more than 13
szt
Change Cart
Timing belt pulley 14M 170 z=64 steel

Timing belt pulley 14M 170 z=64 steel

Pulley 14M z=64, pitch 14 mm, width 170 mm. Material: C45 steel. Mounting: pilot bore.
Pulley 14M z=64, pitch 14 mm, width 170 mm. Material: C45 steel. Mounting: pilot bore.
Weight
48 kg
In Stock
0
In Stock:
0

507,75 €

total
Total (total)

507,75 €

Notify when product is available
Timing belt pulley 14M 170 z=72 Cast iron

Timing belt pulley 14M 170 z=72 Cast iron

Timing belt pulley 14M z=72, width 170 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley 14M z=72, width 170 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: pilot bore. Stock level shown above the price.
Weight
61,4 kg
In Stock
0
In Stock:
0
Ask about price
Timing belt pulley 14M 170 z=72 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M 170 z=72 for Taper-Lock bush 4040 Cast iron

14M z=72 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 170 mm, cast iron. Mounting: Taper-Lock 4040.
14M z=72 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 170 mm, cast iron. Mounting: Taper-Lock 4040.
Weight
46,9 kg
In Stock
4
In Stock:
4

606,57 €

total
Total (total)

606,57 €

Enter quantity
Quantity must be included in range 0,01 - 4
Quantity cannot be more than 4
szt
Change Cart
Timing belt pulley 14M 170 z=80 Cast iron

Timing belt pulley 14M 170 z=80 Cast iron

Timing pulley 14M 80 teeth, belt width 170 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Timing pulley 14M 80 teeth, belt width 170 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Weight
65 kg
In Stock
15
In Stock:
15

712,84 €

total
Total (total)

712,84 €

Enter quantity
Quantity must be included in range 0,01 - 15
Quantity cannot be more than 15
szt
Change Cart
Timing belt pulley 14M 170 z=80 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M 170 z=80 for Taper-Lock bush 4040 Cast iron

Pulley 14M z=80, pitch 14 mm, width 170 mm. Material: cast iron. Mounting: Taper-Lock 4040.
Pulley 14M z=80, pitch 14 mm, width 170 mm. Material: cast iron. Mounting: Taper-Lock 4040.
Weight
48 kg
In Stock
5
In Stock:
5

677,70 €

total
Total (total)

677,70 €

Enter quantity
Quantity must be included in range 0,01 - 5
Quantity cannot be more than 5
szt
Change Cart
Timing belt pulley 14M 170 z=90 Cast iron

Timing belt pulley 14M 170 z=90 Cast iron

14M z=90 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 170 mm, cast iron. Mounting: pilot bore.
14M z=90 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 170 mm, cast iron. Mounting: pilot bore.
Weight
68 kg
In Stock
4
In Stock:
4

739,11 €

total
Total (total)

739,11 €

Enter quantity
Quantity must be included in range 0,01 - 4
Quantity cannot be more than 4
szt
Change Cart
Timing belt pulley 14M 170 z=90 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M 170 z=90 for Taper-Lock bush 4040 Cast iron

Timing belt pulley 14M z=90, width 170 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 4040. Stock level shown above the price.
Timing belt pulley 14M z=90, width 170 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 4040. Stock level shown above the price.
Weight
52,5 kg
In Stock
0
In Stock:
0

808,00 €

total
Total (total)

808,00 €

Notify when product is available
Timing belt pulley 14M 40 z=112 Cast iron

Timing belt pulley 14M 40 z=112 Cast iron

Pulley 14M z=112, pitch 14 mm, width 40 mm. Material: cast iron. Mounting: pilot bore.
Pulley 14M z=112, pitch 14 mm, width 40 mm. Material: cast iron. Mounting: pilot bore.
Weight
26,7 kg
In Stock
17
In Stock:
17

285,27 €

total
Total (total)

285,27 €

Enter quantity
Quantity must be included in range 0,01 - 17
Quantity cannot be more than 17
szt
Change Cart
Timing belt pulley 14M 40 z=112 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 40 z=112 for Taper-Lock bush 3020 Cast iron

Pulley 14M z=112, pitch 14 mm, width 40 mm. Material: cast iron. Mounting: Taper-Lock 3020.
Pulley 14M z=112, pitch 14 mm, width 40 mm. Material: cast iron. Mounting: Taper-Lock 3020.
Weight
18,94 kg
In Stock
39
In Stock:
39

324,22 €

total
Total (total)

324,22 €

Enter quantity
Quantity must be included in range 0,01 - 39
Quantity cannot be more than 39
szt
Change Cart
Timing belt pulley 14M 40 z=144 Cast iron

Timing belt pulley 14M 40 z=144 Cast iron

Timing belt pulley 14M z=144, width 40 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley 14M z=144, width 40 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: pilot bore. Stock level shown above the price.
Weight
35 kg
In Stock
0
In Stock:
0

457,61 €

total
Total (total)

457,61 €

Notify when product is available
Timing belt pulley 14M 40 z=144 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 40 z=144 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M z=144, width 40 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3020. Stock level shown above the price.
Timing belt pulley 14M z=144, width 40 mm, cast iron. Fits HTD 14M belts, pitch 14 mm. Mounting: Taper-Lock 3020. Stock level shown above the price.
Weight
32 kg
In Stock
21
In Stock:
21

497,11 €

total
Total (total)

497,11 €

Enter quantity
Quantity must be included in range 0,01 - 21
Quantity cannot be more than 21
szt
Change Cart
Timing belt pulley 14M 40 z=168 Cast iron

Timing belt pulley 14M 40 z=168 Cast iron

Timing pulley 14M 168 teeth, belt width 40 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Timing pulley 14M 168 teeth, belt width 40 mm. Pitch 14 mm, material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Weight
44,2 kg
In Stock
0
In Stock:
0

622,91 €

total
Total (total)

622,91 €

Notify when product is available
Timing belt pulley 14M 40 z=168 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 40 z=168 for Taper-Lock bush 3020 Cast iron

Timing pulley 14M 168 teeth, belt width 40 mm. Pitch 14 mm, material: cast iron, mounting: Taper-Lock 3020. Stock level shown above the product price.
Timing pulley 14M 168 teeth, belt width 40 mm. Pitch 14 mm, material: cast iron, mounting: Taper-Lock 3020. Stock level shown above the product price.
Weight
44 kg
In Stock
32
In Stock:
32

615,62 €

total
Total (total)

615,62 €

Enter quantity
Quantity must be included in range 0,01 - 32
Quantity cannot be more than 32
szt
Change Cart
Timing belt pulley 14M 40 z=192 Cast iron

Timing belt pulley 14M 40 z=192 Cast iron

14M z=192 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 40 mm, cast iron. Mounting: pilot bore.
14M z=192 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 40 mm, cast iron. Mounting: pilot bore.
Weight
52,2 kg
In Stock
1
In Stock:
1

984,89 €

total
Total (total)

984,89 €

Enter quantity
Quantity must be included in range 0,01 - 1
Quantity cannot be more than 1
szt
Change Cart
Timing belt pulley 14M 40 z=192 for Taper-Lock bush 3020 Cast iron

Timing belt pulley 14M 40 z=192 for Taper-Lock bush 3020 Cast iron

14M z=192 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 40 mm, cast iron. Mounting: Taper-Lock 3020.
14M z=192 - timing belt pulley for HTD 14M belt. Pitch 14 mm, width 40 mm, cast iron. Mounting: Taper-Lock 3020.
Weight
49 kg
In Stock
21
In Stock:
21

778,55 €

total
Total (total)

778,55 €

Enter quantity
Quantity must be included in range 0,01 - 21
Quantity cannot be more than 21
szt
Change Cart
Added To Cart
Added To Cart
Added To Cart