Log in
OZDOWSKI Sp. z o.o.

Price Inquiry
New Cart 0 €

Your cart is empty

Filter

Sorting

  • Top Sellers
  • Most Viewed
  • Name (A-Z)
  • Name (Z-A)
  • Price by Ascending
  • Price by Descending
  • Manufacturer (A-Z)
  • Default
  • Recently Added
  • Recently Modified
Name (A-Z)
PILOT BORE
PILOT BORE
FOR TAPER-LOCK
FOR TAPER-LOCK

L 100 timing pulleys (1" belt)

L 100 timing pulleys are the widest pulleys of the L profile, designed for belts with a pitch of 3/8" (9.525 mm) and a width of 1" (25.4 mm). They provide the highest load capacity in this profile.

L 100 timing pulleys - the widest L belt and the highest load capacity of the profile

The widest L belt carries a significantly higher load than the narrower versions, while the pulleys keep the same diameters - you can strengthen the drive without moving to a larger profile. The pulleys comply with the standard, so they fit L belts from various manufacturers. Smaller pulleys are made of C45 steel, and larger ones of grey cast iron. A wider belt runs with less pressure on each tooth, so it retains its properties for longer.

L 100 synchronous pulleys (1 inch belt) - pilot bore and bush versions

L 100 pulleys in the Pilot bore and Taper-Lock subgroups. The dimensions of each pulley, including the seat and hub, are given on the product page.

Frequently asked questions about L 100 timing belt pulleys

What should I do if an L 100 drive is too weak?

The next step is the H profile with a 1/2" pitch. It has larger teeth and a higher load capacity, but requires replacing the pulleys and the belt.

Can I fit an L 050 belt on an L 100 pulley?

Yes, a narrower belt will fit on a wider pulley, but the drive will be wider and heavier than necessary.

Failed to add some of the products to cart.

Recommended

Name and Code
In Stock
Price total
Change Cart
Timing belt pulley L 100 z=10 steel

Timing belt pulley L 100 z=10 steel

Timing pulley L 10 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 10 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,15 kg
In Stock
321
In Stock:
321

3,45 €

total
Total (total)

3,45 €

Enter quantity
Quantity must be included in range 0,01 - 321
Quantity cannot be more than 321
szt
Change Cart
Timing belt pulley L 100 z=11 steel

Timing belt pulley L 100 z=11 steel

L z=11 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: pilot bore.
L z=11 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: pilot bore.
Weight
0,2 kg
In Stock
116
In Stock:
116

3,78 €

total
Total (total)

3,78 €

Enter quantity
Quantity must be included in range 0,01 - 116
Quantity cannot be more than 116
szt
Change Cart
Timing belt pulley L 100 z=12 steel

Timing belt pulley L 100 z=12 steel

Pulley L z=12, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: pilot bore.
Pulley L z=12, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: pilot bore.
Weight
0,26 kg
In Stock
95
In Stock:
95

4,17 €

total
Total (total)

4,17 €

Enter quantity
Quantity must be included in range 0,01 - 95
Quantity cannot be more than 95
szt
Change Cart
Timing belt pulley L 100 z=120 for Taper-Lock bush 2012 cast iron

Timing belt pulley L 100 z=120 for Taper-Lock bush 2012 cast iron

Timing pulley L 120 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: cast iron, mounting: Taper-Lock 2012. Stock level shown above the product price.
Timing pulley L 120 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: cast iron, mounting: Taper-Lock 2012. Stock level shown above the product price.
Weight
8,5 kg
In Stock
25
In Stock:
25

100,75 €

total
Total (total)

100,75 €

Enter quantity
Quantity must be included in range 0,01 - 25
Quantity cannot be more than 25
szt
Change Cart
Timing belt pulley L 100 z=120, cast iron

Timing belt pulley L 100 z=120, cast iron

L z=120 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, cast iron. Mounting: pilot bore.
L z=120 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, cast iron. Mounting: pilot bore.
Weight
8,5 kg
In Stock
2
In Stock:
2

113,76 €

total
Total (total)

113,76 €

Enter quantity
Quantity must be included in range 0,01 - 2
Quantity cannot be more than 2
szt
Change Cart
Timing belt pulley L 100 z=13 steel

Timing belt pulley L 100 z=13 steel

Timing belt pulley L z=13, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=13, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,3 kg
In Stock
212
In Stock:
212

4,75 €

total
Total (total)

4,75 €

Enter quantity
Quantity must be included in range 0,01 - 212
Quantity cannot be more than 212
szt
Change Cart
Timing belt pulley L 100 z=14 steel

Timing belt pulley L 100 z=14 steel

Timing pulley L 14 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 14 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,34 kg
In Stock
176
In Stock:
176

5,15 €

total
Total (total)

5,15 €

Enter quantity
Quantity must be included in range 0,01 - 176
Quantity cannot be more than 176
szt
Change Cart
Timing belt pulley L 100 z=15 steel

Timing belt pulley L 100 z=15 steel

L z=15 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: pilot bore.
L z=15 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: pilot bore.
Weight
0,45 kg
In Stock
217
In Stock:
217

5,67 €

total
Total (total)

5,67 €

Enter quantity
Quantity must be included in range 0,01 - 217
Quantity cannot be more than 217
szt
Change Cart
Timing belt pulley L 100 z=16 steel

Timing belt pulley L 100 z=16 steel

Pulley L z=16, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: pilot bore.
Pulley L z=16, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: pilot bore.
Weight
0,52 kg
In Stock
385
In Stock:
385

6,06 €

total
Total (total)

6,06 €

Enter quantity
Quantity must be included in range 0,01 - 385
Quantity cannot be more than 385
szt
Change Cart
Timing belt pulley L 100 z=17 steel

Timing belt pulley L 100 z=17 steel

Timing belt pulley L z=17, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=17, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,53 kg
In Stock
477
In Stock:
477

6,70 €

total
Total (total)

6,70 €

Enter quantity
Quantity must be included in range 0,01 - 477
Quantity cannot be more than 477
szt
Change Cart
Timing belt pulley L 100 z=18 for Taper-Lock bush 1108 steel

Timing belt pulley L 100 z=18 for Taper-Lock bush 1108 steel

Timing belt pulley L z=18, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: Taper-Lock 1108. Stock level shown above the price.
Timing belt pulley L z=18, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: Taper-Lock 1108. Stock level shown above the price.
Weight
0,2 kg
In Stock
194
In Stock:
194

6,59 €

total
Total (total)

6,59 €

Enter quantity
Quantity must be included in range 0,01 - 194
Quantity cannot be more than 194
szt
Change Cart
Timing belt pulley L 100 z=18 steel

Timing belt pulley L 100 z=18 steel

Timing pulley L 18 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 18 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,62 kg
In Stock
441
In Stock:
441

7,51 €

total
Total (total)

7,51 €

Enter quantity
Quantity must be included in range 0,01 - 441
Quantity cannot be more than 441
szt
Change Cart
Timing belt pulley L 100 z=19 for Taper-Lock bush 1108 steel

Timing belt pulley L 100 z=19 for Taper-Lock bush 1108 steel

Timing pulley L 19 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: Taper-Lock 1108. Stock level shown above the product price.
Timing pulley L 19 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: Taper-Lock 1108. Stock level shown above the product price.
Weight
0,3 kg
In Stock
69
In Stock:
69

6,90 €

total
Total (total)

6,90 €

Enter quantity
Quantity must be included in range 0,01 - 69
Quantity cannot be more than 69
szt
Change Cart
Timing belt pulley L 100 z=19 steel

Timing belt pulley L 100 z=19 steel

L z=19 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: pilot bore.
L z=19 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: pilot bore.
Weight
0,66 kg
In Stock
215
In Stock:
215

7,79 €

total
Total (total)

7,79 €

Enter quantity
Quantity must be included in range 0,01 - 215
Quantity cannot be more than 215
szt
Change Cart
Timing belt pulley L 100 z=20 for Taper-Lock bush 1108 steel

Timing belt pulley L 100 z=20 for Taper-Lock bush 1108 steel

L z=20 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: Taper-Lock 1108.
L z=20 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 100 mm, C45 steel. Mounting: Taper-Lock 1108.
Weight
0,4 kg
In Stock
140
In Stock:
140

7,54 €

total
Total (total)

7,54 €

Enter quantity
Quantity must be included in range 0,01 - 140
Quantity cannot be more than 140
szt
Change Cart
Timing belt pulley L 100 z=20 steel

Timing belt pulley L 100 z=20 steel

Pulley L z=20, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: pilot bore.
Pulley L z=20, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: pilot bore.
Weight
0,72 kg
In Stock
153
In Stock:
153

8,54 €

total
Total (total)

8,54 €

Enter quantity
Quantity must be included in range 0,01 - 153
Quantity cannot be more than 153
szt
Change Cart
Timing belt pulley L 100 z=21 for Taper-Lock bush 1108 steel

Timing belt pulley L 100 z=21 for Taper-Lock bush 1108 steel

Pulley L z=21, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: Taper-Lock 1108.
Pulley L z=21, pitch 3/8" (9.525 mm), width 100 mm. Material: C45 steel. Mounting: Taper-Lock 1108.
Weight
0,4 kg
In Stock
197
In Stock:
197

7,81 €

total
Total (total)

7,81 €

Enter quantity
Quantity must be included in range 0,01 - 197
Quantity cannot be more than 197
szt
Change Cart
Timing belt pulley L 100 z=21 steel

Timing belt pulley L 100 z=21 steel

Timing belt pulley L z=21, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=21, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,77 kg
In Stock
151
In Stock:
151

8,84 €

total
Total (total)

8,84 €

Enter quantity
Quantity must be included in range 0,01 - 151
Quantity cannot be more than 151
szt
Change Cart
Timing belt pulley L 100 z=22 for Taper-Lock bush 1108 steel

Timing belt pulley L 100 z=22 for Taper-Lock bush 1108 steel

Timing belt pulley L z=22, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: Taper-Lock 1108. Stock level shown above the price.
Timing belt pulley L z=22, width 100 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: Taper-Lock 1108. Stock level shown above the price.
Weight
0,4 kg
In Stock
137
In Stock:
137

8,70 €

total
Total (total)

8,70 €

Enter quantity
Quantity must be included in range 0,01 - 137
Quantity cannot be more than 137
szt
Change Cart
Timing belt pulley L 100 z=22 steel

Timing belt pulley L 100 z=22 steel

Timing pulley L 22 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 22 teeth, belt width 100 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,88 kg
In Stock
409
In Stock:
409

9,87 €

total
Total (total)

9,87 €

Enter quantity
Quantity must be included in range 0,01 - 409
Quantity cannot be more than 409
szt
Change Cart
Added To Cart
Added To Cart
Added To Cart