Log in
OZDOWSKI Sp. z o.o.

Price Inquiry
New Cart 0 €

Your cart is empty

Filter

Sorting

  • Top Sellers
  • Most Viewed
  • Name (A-Z)
  • Name (Z-A)
  • Price by Ascending
  • Price by Descending
  • Manufacturer (A-Z)
  • Default
  • Recently Added
  • Recently Modified
Name (A-Z)
PILOT BORE
PILOT BORE
FOR TAPER-LOCK
FOR TAPER-LOCK

L 050 timing pulleys (1/2" belt)

L 050 timing pulleys are designed for L belts with a pitch of 3/8" (9.525 mm) and a width of 1/2" (12.7 mm). They are the narrowest pulleys of the L profile, chosen for compact drives where the transmitted power allows a narrow belt.

L 050 timing pulley - a large ratio in a small space

A narrow belt has a lower mass and puts less load on the bearings, and a narrow pulley takes up little space on the shaft. In this width you will also find very small pulleys, which allow a large ratio in a small space. Smaller pulleys are made of C45 steel, and larger ones of grey cast iron. The pulleys comply with the standard, so they fit L 050 belts from various manufacturers.

L 050 synchronous pulleys: pilot bore and for Taper-Lock bush

L 050 pulleys in the Pilot bore subgroup, with a pilot bore, and the Taper-Lock subgroup, with a seat for a taper bush. The dimensions of each pulley are given on the product page.

Frequently asked questions about L 050 timing belt pulleys

Why are the larger pulleys made of cast iron?

Grey cast iron dampens vibration well and allows a large pulley to be cast with a lightened web. Small pulleys, in which each tooth is more heavily loaded, are made of steel.

Can an L 050 belt run on an L 075 pulley?

It will fit, but the drive will be wider than necessary. It is best to match the pulley to the belt width.

Failed to add some of the products to cart.

Recommended

Name and Code
In Stock
Price total
Change Cart
Timing belt pulley L 050 z=10 steel

Timing belt pulley L 050 z=10 steel

Timing belt pulley L z=10, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=10, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,11 kg
In Stock
1553
In Stock:
1553

2,67 €

total
Total (total)

2,67 €

Enter quantity
Quantity must be included in range 0,01 - 1553
Quantity cannot be more than 1553
szt
Change Cart
Timing belt pulley L 050 z=11 steel

Timing belt pulley L 050 z=11 steel

Timing pulley L 11 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 11 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,14 kg
In Stock
110
In Stock:
110

2,95 €

total
Total (total)

2,95 €

Enter quantity
Quantity must be included in range 0,01 - 110
Quantity cannot be more than 110
szt
Change Cart
Timing belt pulley L 050 z=12 steel

Timing belt pulley L 050 z=12 steel

L z=12 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: pilot bore.
L z=12 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: pilot bore.
Weight
0,17 kg
In Stock
3553
In Stock:
3553

3,20 €

total
Total (total)

3,20 €

Enter quantity
Quantity must be included in range 0,01 - 3553
Quantity cannot be more than 3553
szt
Change Cart
Timing belt pulley L 050 z=120 for Taper-Lock bush 2012 cast iron

Timing belt pulley L 050 z=120 for Taper-Lock bush 2012 cast iron

Pulley L z=120, pitch 3/8" (9.525 mm), width 50 mm. Material: cast iron. Mounting: Taper-Lock 2012.
Pulley L z=120, pitch 3/8" (9.525 mm), width 50 mm. Material: cast iron. Mounting: Taper-Lock 2012.
Weight
6,8 kg
In Stock
26
In Stock:
26

85,71 €

total
Total (total)

85,71 €

Enter quantity
Quantity must be included in range 0,01 - 26
Quantity cannot be more than 26
szt
Change Cart
Timing belt pulley L 050 z=120, cast iron

Timing belt pulley L 050 z=120, cast iron

L z=120 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, cast iron. Mounting: pilot bore.
L z=120 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, cast iron. Mounting: pilot bore.
Weight
6 kg
In Stock
1
In Stock:
1

83,21 €

total
Total (total)

83,21 €

Enter quantity
Quantity must be included in range 0,01 - 1
Quantity cannot be more than 1
szt
Change Cart
Timing belt pulley L 050 z=13 steel

Timing belt pulley L 050 z=13 steel

Pulley L z=13, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: pilot bore.
Pulley L z=13, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: pilot bore.
Weight
0,18 kg
In Stock
438
In Stock:
438

3,62 €

total
Total (total)

3,62 €

Enter quantity
Quantity must be included in range 0,01 - 438
Quantity cannot be more than 438
szt
Change Cart
Timing belt pulley L 050 z=14 steel

Timing belt pulley L 050 z=14 steel

Timing belt pulley L z=14, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=14, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,22 kg
In Stock
307
In Stock:
307

3,92 €

total
Total (total)

3,92 €

Enter quantity
Quantity must be included in range 0,01 - 307
Quantity cannot be more than 307
szt
Change Cart
Timing belt pulley L 050 z=15 steel

Timing belt pulley L 050 z=15 steel

Timing pulley L 15 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 15 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,28 kg
In Stock
808
In Stock:
808

4,37 €

total
Total (total)

4,37 €

Enter quantity
Quantity must be included in range 0,01 - 808
Quantity cannot be more than 808
szt
Change Cart
Timing belt pulley L 050 z=16 steel

Timing belt pulley L 050 z=16 steel

L z=16 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: pilot bore.
L z=16 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: pilot bore.
Weight
0,35 kg
In Stock
393
In Stock:
393

4,71 €

total
Total (total)

4,71 €

Enter quantity
Quantity must be included in range 0,01 - 393
Quantity cannot be more than 393
szt
Change Cart
Timing belt pulley L 050 z=17 steel

Timing belt pulley L 050 z=17 steel

Pulley L z=17, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: pilot bore.
Pulley L z=17, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: pilot bore.
Weight
0,36 kg
In Stock
160
In Stock:
160

5,18 €

total
Total (total)

5,18 €

Enter quantity
Quantity must be included in range 0,01 - 160
Quantity cannot be more than 160
szt
Change Cart
Timing belt pulley L 050 z=18 for Taper-Lock bush 1108 steel

Timing belt pulley L 050 z=18 for Taper-Lock bush 1108 steel

L z=18 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: Taper-Lock 1108.
L z=18 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: Taper-Lock 1108.
Weight
0,2 kg
In Stock
424
In Stock:
424

5,37 €

total
Total (total)

5,37 €

Enter quantity
Quantity must be included in range 0,01 - 424
Quantity cannot be more than 424
szt
Change Cart
Timing belt pulley L 050 z=18 steel

Timing belt pulley L 050 z=18 steel

Timing belt pulley L z=18, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=18, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,42 kg
In Stock
904
In Stock:
904

5,79 €

total
Total (total)

5,79 €

Enter quantity
Quantity must be included in range 0,01 - 904
Quantity cannot be more than 904
szt
Change Cart
Timing belt pulley L 050 z=19 for Taper-Lock bush 1108 steel

Timing belt pulley L 050 z=19 for Taper-Lock bush 1108 steel

Pulley L z=19, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: Taper-Lock 1108.
Pulley L z=19, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: Taper-Lock 1108.
Weight
0,2 kg
In Stock
313
In Stock:
313

5,59 €

total
Total (total)

5,59 €

Enter quantity
Quantity must be included in range 0,01 - 313
Quantity cannot be more than 313
szt
Change Cart
Timing belt pulley L 050 z=19 steel

Timing belt pulley L 050 z=19 steel

Timing pulley L 19 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley L 19 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
0,45 kg
In Stock
313
In Stock:
313

6,04 €

total
Total (total)

6,04 €

Enter quantity
Quantity must be included in range 0,01 - 313
Quantity cannot be more than 313
szt
Change Cart
Timing belt pulley L 050 z=20 for Taper-Lock bush 1108 steel

Timing belt pulley L 050 z=20 for Taper-Lock bush 1108 steel

Timing belt pulley L z=20, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: Taper-Lock 1108. Stock level shown above the price.
Timing belt pulley L z=20, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: Taper-Lock 1108. Stock level shown above the price.
Weight
0,2 kg
In Stock
121
In Stock:
121

6,12 €

total
Total (total)

6,12 €

Enter quantity
Quantity must be included in range 0,01 - 121
Quantity cannot be more than 121
szt
Change Cart
Timing belt pulley L 050 z=20 steel

Timing belt pulley L 050 z=20 steel

L z=20 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: pilot bore.
L z=20 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: pilot bore.
Weight
0,48 kg
In Stock
1283
In Stock:
1283

6,60 €

total
Total (total)

6,60 €

Enter quantity
Quantity must be included in range 0,01 - 1283
Quantity cannot be more than 1283
szt
Change Cart
Timing belt pulley L 050 z=21 for Taper-Lock bush 1108 steel

Timing belt pulley L 050 z=21 for Taper-Lock bush 1108 steel

Timing pulley L 21 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: Taper-Lock 1108. Stock level shown above the product price.
Timing pulley L 21 teeth, belt width 50 mm. Pitch 3/8" (9.525 mm), material: C45 steel, mounting: Taper-Lock 1108. Stock level shown above the product price.
Weight
0,3 kg
In Stock
196
In Stock:
196

6,35 €

total
Total (total)

6,35 €

Enter quantity
Quantity must be included in range 0,01 - 196
Quantity cannot be more than 196
szt
Change Cart
Timing belt pulley L 050 z=21 steel

Timing belt pulley L 050 z=21 steel

Pulley L z=21, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: pilot bore.
Pulley L z=21, pitch 3/8" (9.525 mm), width 50 mm. Material: C45 steel. Mounting: pilot bore.
Weight
0,57 kg
In Stock
525
In Stock:
525

6,79 €

total
Total (total)

6,79 €

Enter quantity
Quantity must be included in range 0,01 - 525
Quantity cannot be more than 525
szt
Change Cart
Timing belt pulley L 050 z=22 for Taper-Lock bush 1108 steel

Timing belt pulley L 050 z=22 for Taper-Lock bush 1108 steel

L z=22 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: Taper-Lock 1108.
L z=22 - timing belt pulley for L belt. Pitch 3/8" (9.525 mm), width 50 mm, C45 steel. Mounting: Taper-Lock 1108.
Weight
0,3 kg
In Stock
108
In Stock:
108

7,04 €

total
Total (total)

7,04 €

Enter quantity
Quantity must be included in range 0,01 - 108
Quantity cannot be more than 108
szt
Change Cart
Timing belt pulley L 050 z=22 steel

Timing belt pulley L 050 z=22 steel

Timing belt pulley L z=22, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley L z=22, width 50 mm, C45 steel. Fits L belts, pitch 3/8" (9.525 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
0,59 kg
In Stock
488
In Stock:
488

7,57 €

total
Total (total)

7,57 €

Enter quantity
Quantity must be included in range 0,01 - 488
Quantity cannot be more than 488
szt
Change Cart
Added To Cart
Added To Cart
Added To Cart