Log in
OZDOWSKI Sp. z o.o.

Price Inquiry
New Cart 0 €

Your cart is empty

Filter

Sorting

  • Top Sellers
  • Most Viewed
  • Name (A-Z)
  • Name (Z-A)
  • Price by Ascending
  • Price by Descending
  • Manufacturer (A-Z)
  • Default
  • Recently Added
  • Recently Modified
Name (A-Z)
PILOT BORE
PILOT BORE
FOR TAPER-LOCK
FOR TAPER-LOCK

H 150 timing pulleys (1 1/2" belt)

H 150 timing pulleys are designed for H belts with a pitch of 1/2" (12.7 mm) and a width of 1 1/2" (38.1 mm). A wider belt carries a higher load at the same pulley diameters, which is why this width is chosen when an H 100 drive is working at the limit of its capabilities.

H 150 timing pulleys - higher load capacity without changing pulley diameters

Moving to a wider belt increases the load capacity of the drive without changing the pulley diameters or the ratio - you do not need to rebuild the machine if there is room for wider pulleys. The belt runs with lower specific pressure on the teeth, so it wears more slowly. Smaller pulleys are made of C45 steel, and larger ones of grey cast iron.

H 150 synchronous pulleys: pilot bore and for Taper-Lock bush

H 150 pulleys in two versions: Pilot bore, with a pilot bore, and Taper-Lock, with a seat for a taper bush. The dimensions of each pulley are given on the product page.

Questions and answers: H 150 timing belt pulleys

Can I replace an H 100 drive with an H 150 drive?

Yes, if there is room in the machine for wider pulleys. Both pulleys and the belt must be replaced - pulleys with the same number of teeth will keep the existing ratio.

Is an H 150 pulley heavier than an H 100?

Yes, it has a wider rim and usually a longer hub. With large pulleys, this is worth taking into account when selecting bearings and the shaft.

Failed to add some of the products to cart.

Recommended

Name and Code
In Stock
Price total
Change Cart
Timing belt pulley H 150 z=33 steel

Timing belt pulley H 150 z=33 steel

Timing belt pulley H z=33, width 150 mm, C45 steel. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley H z=33, width 150 mm, C45 steel. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
4,66 kg
In Stock
35
In Stock:
35

40,48 €

total
Total (total)

40,48 €

Enter quantity
Quantity must be included in range 0,01 - 35
Quantity cannot be more than 35
szt
Change Cart
Timing belt pulley H 150 z=34 steel

Timing belt pulley H 150 z=34 steel

Timing pulley H 34 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley H 34 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
4,98 kg
In Stock
78
In Stock:
78

40,78 €

total
Total (total)

40,78 €

Enter quantity
Quantity must be included in range 0,01 - 78
Quantity cannot be more than 78
szt
Change Cart
Timing belt pulley H 150 z=35 steel

Timing belt pulley H 150 z=35 steel

H z=35 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, C45 steel. Mounting: pilot bore.
H z=35 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, C45 steel. Mounting: pilot bore.
Weight
5,3 kg
In Stock
72
In Stock:
72

46,10 €

total
Total (total)

46,10 €

Enter quantity
Quantity must be included in range 0,01 - 72
Quantity cannot be more than 72
szt
Change Cart
Timing belt pulley H 150 z=36 for Taper-Lock bush 1610 steel

Timing belt pulley H 150 z=36 for Taper-Lock bush 1610 steel

Timing pulley H 36 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: C45 steel, mounting: Taper-Lock 1610. Stock level shown above the product price.
Timing pulley H 36 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: C45 steel, mounting: Taper-Lock 1610. Stock level shown above the product price.
Weight
3,1 kg
In Stock
62
In Stock:
62

35,60 €

total
Total (total)

35,60 €

Enter quantity
Quantity must be included in range 0,01 - 62
Quantity cannot be more than 62
szt
Change Cart
Timing belt pulley H 150 z=36 steel

Timing belt pulley H 150 z=36 steel

Pulley H z=36, pitch 1/2" (12.7 mm), width 150 mm. Material: C45 steel. Mounting: pilot bore.
Pulley H z=36, pitch 1/2" (12.7 mm), width 150 mm. Material: C45 steel. Mounting: pilot bore.
Weight
5,5 kg
In Stock
175
In Stock:
175

47,60 €

total
Total (total)

47,60 €

Enter quantity
Quantity must be included in range 0,01 - 175
Quantity cannot be more than 175
szt
Change Cart
Timing belt pulley H 150 z=38 steel

Timing belt pulley H 150 z=38 steel

Timing belt pulley H z=38, width 150 mm, C45 steel. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley H z=38, width 150 mm, C45 steel. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
6,1 kg
In Stock
103
In Stock:
103

49,08 €

total
Total (total)

49,08 €

Enter quantity
Quantity must be included in range 0,01 - 103
Quantity cannot be more than 103
szt
Change Cart
Timing belt pulley H 150 z=40 for Taper-Lock bush 1610 steel

Timing belt pulley H 150 z=40 for Taper-Lock bush 1610 steel

H z=40 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, C45 steel. Mounting: Taper-Lock 1610.
H z=40 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, C45 steel. Mounting: Taper-Lock 1610.
Weight
4 kg
In Stock
142
In Stock:
142

43,12 €

total
Total (total)

43,12 €

Enter quantity
Quantity must be included in range 0,01 - 142
Quantity cannot be more than 142
szt
Change Cart
Timing belt pulley H 150 z=40 steel

Timing belt pulley H 150 z=40 steel

Timing pulley H 40 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Timing pulley H 40 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: C45 steel, mounting: pilot bore. Stock level shown above the product price.
Weight
6,8 kg
In Stock
63
In Stock:
63

54,95 €

total
Total (total)

54,95 €

Enter quantity
Quantity must be included in range 0,01 - 63
Quantity cannot be more than 63
szt
Change Cart
Timing belt pulley H 150 z=44 for Taper-Lock bush 2012 steel

Timing belt pulley H 150 z=44 for Taper-Lock bush 2012 steel

Pulley H z=44, pitch 1/2" (12.7 mm), width 150 mm. Material: C45 steel. Mounting: Taper-Lock 2012.
Pulley H z=44, pitch 1/2" (12.7 mm), width 150 mm. Material: C45 steel. Mounting: Taper-Lock 2012.
Weight
4,4 kg
In Stock
30
In Stock:
30

49,52 €

total
Total (total)

49,52 €

Enter quantity
Quantity must be included in range 0,01 - 30
Quantity cannot be more than 30
szt
Change Cart
Timing belt pulley H 150 z=44, cast iron

Timing belt pulley H 150 z=44, cast iron

H z=44 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, cast iron. Mounting: pilot bore.
H z=44 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, cast iron. Mounting: pilot bore.
Weight
8,5 kg
In Stock
44
In Stock:
44

64,53 €

total
Total (total)

64,53 €

Enter quantity
Quantity must be included in range 0,01 - 44
Quantity cannot be more than 44
szt
Change Cart
Timing belt pulley H 150 z=45, cast iron

Timing belt pulley H 150 z=45, cast iron

Pulley H z=45, pitch 1/2" (12.7 mm), width 150 mm. Material: cast iron. Mounting: pilot bore.
Pulley H z=45, pitch 1/2" (12.7 mm), width 150 mm. Material: cast iron. Mounting: pilot bore.
Weight
9 kg
In Stock
9
In Stock:
9

69,82 €

total
Total (total)

69,82 €

Enter quantity
Quantity must be included in range 0,01 - 9
Quantity cannot be more than 9
szt
Change Cart
Timing belt pulley H 150 z=48 for Taper-Lock bush 2012 steel

Timing belt pulley H 150 z=48 for Taper-Lock bush 2012 steel

Timing belt pulley H z=48, width 150 mm, C45 steel. Fits H belts, pitch 1/2" (12.7 mm). Mounting: Taper-Lock 2012. Stock level shown above the price.
Timing belt pulley H z=48, width 150 mm, C45 steel. Fits H belts, pitch 1/2" (12.7 mm). Mounting: Taper-Lock 2012. Stock level shown above the price.
Weight
4,8 kg
In Stock
5
In Stock:
5

59,79 €

total
Total (total)

59,79 €

Enter quantity
Quantity must be included in range 0,01 - 5
Quantity cannot be more than 5
szt
Change Cart
Timing belt pulley H 150 z=48, cast iron

Timing belt pulley H 150 z=48, cast iron

Timing belt pulley H z=48, width 150 mm, cast iron. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley H z=48, width 150 mm, cast iron. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
6,7 kg
In Stock
60
In Stock:
60

79,62 €

total
Total (total)

79,62 €

Enter quantity
Quantity must be included in range 0,01 - 60
Quantity cannot be more than 60
szt
Change Cart
Timing belt pulley H 150 z=49, cast iron

Timing belt pulley H 150 z=49, cast iron

Timing pulley H 49 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Timing pulley H 49 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Weight
7 kg
In Stock
18
In Stock:
18

83,26 €

total
Total (total)

83,26 €

Enter quantity
Quantity must be included in range 0,01 - 18
Quantity cannot be more than 18
szt
Change Cart
Timing belt pulley H 150 z=50, cast iron

Timing belt pulley H 150 z=50, cast iron

H z=50 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, cast iron. Mounting: pilot bore.
H z=50 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, cast iron. Mounting: pilot bore.
Weight
7,1 kg
In Stock
92
In Stock:
92

86,85 €

total
Total (total)

86,85 €

Enter quantity
Quantity must be included in range 0,01 - 92
Quantity cannot be more than 92
szt
Change Cart
Timing belt pulley H 150 z=52, cast iron

Timing belt pulley H 150 z=52, cast iron

Pulley H z=52, pitch 1/2" (12.7 mm), width 150 mm. Material: cast iron. Mounting: pilot bore.
Pulley H z=52, pitch 1/2" (12.7 mm), width 150 mm. Material: cast iron. Mounting: pilot bore.
Weight
7,3 kg
In Stock
129
In Stock:
129

89,14 €

total
Total (total)

89,14 €

Enter quantity
Quantity must be included in range 0,01 - 129
Quantity cannot be more than 129
szt
Change Cart
Timing belt pulley H 150 z=58, cast iron

Timing belt pulley H 150 z=58, cast iron

Timing belt pulley H z=58, width 150 mm, cast iron. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Timing belt pulley H z=58, width 150 mm, cast iron. Fits H belts, pitch 1/2" (12.7 mm). Mounting: pilot bore. Stock level shown above the price.
Weight
8,1 kg
In Stock
20
In Stock:
20

92,92 €

total
Total (total)

92,92 €

Enter quantity
Quantity must be included in range 0,01 - 20
Quantity cannot be more than 20
szt
Change Cart
Timing belt pulley H 150 z=60 for Taper-Lock bush 2012 cast iron

Timing belt pulley H 150 z=60 for Taper-Lock bush 2012 cast iron

Timing pulley H 60 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: cast iron, mounting: Taper-Lock 2012. Stock level shown above the product price.
Timing pulley H 60 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: cast iron, mounting: Taper-Lock 2012. Stock level shown above the product price.
Weight
5,4 kg
In Stock
31
In Stock:
31

85,04 €

total
Total (total)

85,04 €

Enter quantity
Quantity must be included in range 0,01 - 31
Quantity cannot be more than 31
szt
Change Cart
Timing belt pulley H 150 z=60, cast iron

Timing belt pulley H 150 z=60, cast iron

Timing pulley H 60 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Timing pulley H 60 teeth, belt width 150 mm. Pitch 1/2" (12.7 mm), material: cast iron, mounting: pilot bore. Stock level shown above the product price.
Weight
9 kg
In Stock
47
In Stock:
47

96,18 €

total
Total (total)

96,18 €

Enter quantity
Quantity must be included in range 0,01 - 47
Quantity cannot be more than 47
szt
Change Cart
Timing belt pulley H 150 z=70, cast iron

Timing belt pulley H 150 z=70, cast iron

H z=70 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, cast iron. Mounting: pilot bore.
H z=70 - timing belt pulley for H belt. Pitch 1/2" (12.7 mm), width 150 mm, cast iron. Mounting: pilot bore.
Weight
10,5 kg
In Stock
14
In Stock:
14

111,63 €

total
Total (total)

111,63 €

Enter quantity
Quantity must be included in range 0,01 - 14
Quantity cannot be more than 14
szt
Change Cart
Added To Cart
Added To Cart
Added To Cart